FW 07.00.00/HAFM SW 08.06.00 HP StorageWorks HA-Fabric Manager User Guide (AA-RS2CF-TE, March 2005)

HA-Fabric Manager user guide 203
Cannot enable
beaconing while the
system light is on.
Occurs when choosing
Enable Beaconing option
for a failed FRU.
Replace FRU and enable
beaconing again or enable
beaconing on an operating FRU.
Cannot enable
beaconing while the
system error light is on.
Beaconing cannot be
enabled while the system
error light is on.
Select Clear System Error Light
from Product menu to clear error
light, then enable beaconing.
Cannot enable Open
Trunking while Enterprise
Fabric Mode is active
and the switch is offline.
Enterprise Fabric mode is
active and the switch or
director is online and you
attempted to enable
Open Trunking. This
message only displays if
the optional Open
Trunking feature is
installed.
Perform either of the following
steps:
• Disable Enterprise Fabric
Mode option by selecting
the appropriate fabric in
the Fabric Tree portion of
the HAFM Manager
window (Fabrics tab) and
then selecting Enterprise
Fabric Mode from the
Fabrics menu. When the
Enterprise Fabric Mode
dialog box displays, click
Start and follow prompts
to disable the feature.
• Set the switch or director
offline through the Set
Online State dialog box.
Display this dialog box by
selecting Set Online
State from the Element
Manager Maintenance
menu.
Cannot have E-Ports if
Management Style is
FICON unless SANtegrity
feature is installed. Please
contact your sales
representative.
Firmware is below the
required level and you
attempted to change
management style from
Open Systems to FICON
management style with
E_Ports configured, but
SANtegrity Binding is not
installed.
Informational message. If firmware
is below the required level and you
install SANtegrity Binding before
changing to FICON management
style, then E_Ports will remain as
E_Ports when you change to
FICON management style. If
SANtegrity Binding is not installed,
setting a director to FICON
management style will change all
E_ports to G_Ports.
Table 24 Element Manager Messages (continued)
Message Description Action