FW 08.01.00 McDATA Sphereon 4500 Fabric Switch Installation and Service Manual (620-000159-330, November 2005)

2
Installation Tasks
2-13
Installation Tasks
— Security - includes SANtegrity authentication (settings, access
control list, and remote authentication dial-in user service
(RADIUS) server support), Enterprise Fabric Mode, and
SANtegrity binding (fabric, switch, and port binding).
— Interswitch links - includes OpenTrunking, preferred path,
and interswitch link (ISL) port fencing.
Configure Product
Identification
Perform this procedure to configure the product identification. The
Name, Location, and Contact variables correspond respectively to the
SNMP variables sysName, sysLocation, and sysContact, and are used by
management workstations when obtaining product data.
1. Select Switch and Identification from the Configure menu at any
view. The Identification View displays (Figure 2-4).
Figure 2-4 Identification View
a. Type a unique product name of 24 alphanumeric characters or
less in the Name field. If installed on a public LAN, the name
should reflect the product’s Ethernet network domain name
system (DNS) host name.
b. Type a product description of 255 alphanumeric characters or
less in the Description field.
c. Type the product’s physical location (255 alphanumeric
characters or less) in the Location field.
d. Type the name of a contact person (255 alphanumeric
characters or less) in the Contact field.
2. Click OK to save and activate changes.