edge switch 2/32 product manager user guide

edge switch 2/32 product manager user guide 3–7
Configuring the Switch
b. Click Set Offline. A warning box displays asking you to confirm the offline
state.
c. Click OK.
2. Choose Configure > Operating Parameters > Fabric Parameters from the
Product Manager window. The Configure Fabric Parameters dialog box
displays, as shown in Figure 3–3.
Figure 3–3: Configure Fabric Parameters dialog box
NOTE: Ordinarily, you do not need to change values in this dialog box from their defaults. The
only exception is the Preferred Domain ID. Change this value if the Switch will participate in a
multiSwitch fabric.
3. Use information under “Fabric Parameters” to change settings as required for
parameters in this dialog box.
4. After you change settings, click the Activate button.
5. Back up the configuration data when you are finished configuring the Switch.