edge switch 2/32 product manager user guide

edge switch 2/32 product manager user guide 3–19
Configuring the Switch
6. Click OK to save changes and to close the Save Address Configuration As
dialog box.
7. In the Configure Addresses - “Active” dialog box, click Activate to activate the
configuration or click Cancel to close without activating.
NOTE: If you click Cancel after saving, your configuration will still be added to the library
without being activated.
Manage Stored Address Configurations
(S/390 mode only) Once addresses configurations are created through the Configure
Addresses - “Active” dialog box they are saved to the Address Configuration
Library. Use this procedure to manage up to 32 address configurations in the Address
Configuration Library.
Procedure
To manage saved library entries:
1. Choose Addresses, then choose Stored from the Configuration menu on the
menu bar.
The Address Configuration Library dialog box displays.
Figure 3–8: Address Configuration Library dialog box