edge switch 2/32 product manager user guide

edge switch 2/32 product manager user guide 3–35
Configuring the Switch
2. To change the state, choose the alert by choosing the alert information in the table.
3. If the alert is active, choose Deactivate to change to the deactive state. If the alert
is deactive, choose Activate to change to the active state.
Delete Alerts
Use the following steps to delete existing threshold alerts.
1. Choose Threshold Alerts from the Configure menu.
The Configure Threshold Alerts dialog box displays.
2. Choose the alert that you want to delete by choosing the alert information in the
table.
3. Choose Delete.
A message displays asking you to confirm the deletion.
4. Click Yes.
The alert is removed from the dialog box.
Export Configuration Report
Use this option to save an ASCII file of all currently saved configuration data in
Switch NV_RAM to your hard drive or a diskette. Use any desktop publishing
application to import this ASCII file for viewing or printing.
NOTE: This file cannot be used to set configuration parameters through the Product Manager.
Data in the file includes:
• Product identification
Data input into the Configure Identification dialog box.
• Operating parameters
Data input into the Operating Parameters dialog box.
• Port parameters
Data input into the Configure Ports dialog box.