edge switch 2/32 product manager user guide

edge switch 2/32 product manager user guide 3–37
Configuring the Switch
Enable Web Server
Choose this option from the Configure menu on the menu bar to place a check mark
in the check box to enable the Embedded Web Server interface on the Switch. Choose
the option again to remove the check mark and disable the Embedded Web Server
interface. When enabled, users at remote workstations cannot access the interface. If
enabled, HP recommends changing the user names and/or passwords from the default
values to prevent unauthorized access.
Enable Telnet
Choose this option from the Configure menu on the menu bar to place a check mark
in the check box to enable telnet access to the Switch. Choose the option again to
remove the check mark and disable telnet access. When disabled, users at remote
workstations cannot access the Switch through telnet to use the Command Line
Interface (CLI) or perform other tasks. When enabled, users at remote workstations
cannot access the interface. If enabled, HP recommends changing the user names
and/or passwords from the default values to prevent unauthorized access.
Backing Up and Restoring Configuration Data
You can back up the NVRAM configuration, which includes all of the data you input
through instructions in this chapter, using the Backup and Restore Configuration
option. This option is available through the Maintenance menu. Choosing this option
backs up the configuration data to a file on the HAFM server hard drive. The restore
function writes this data back to NVRAM on the Switch. Using the restore function
overwrites the existing configuration. For more information, refer to Backup and
Restore Configuration on page 5-7.
In addition to the Backup and Restore Configuration option, the Iomega QuikSync
application backs up configuration and other critical data from the HAFM server
automatically. As long as a Zip disk remains in the Zip drive of the HAFM server, data
backs up to the Zip disk whenever the directory contents change or you reboot the
HAFM server. For more information, refer to Backup and Restore Configuration on
page 5-7.
NOTE: We do not recommend changing the default QuikSync settings.