edge switch 2/32 product manager user guide

edge switch 2/32 product manager user guide 5–5
Using Maintenance Features
To set the Switch online or offline (depending on current state), use the following
steps:
1. Right-click the Switch in the Hardware view and choose Set Online State in the
menu, or choose Set Online State from the Maintenance menu on the menu bar.
One of the following dialog boxes displays, depending on the current operating
state.
Figure 5–3: Set Online State dialog box (Offline)
Figure 5–4: Set Online State dialog box (Online)
2. Click Set Offline or Set Online, depending on the operating state you want to set.
3. When a warning box displays requesting you to confirm the offline or online state,
click OK.
As the Switch goes offline, “OFFLINE” displays in the State field of the Switch
Status table in the Hardware view. LED indicators on all ports with attached devices
stay green, but the Switch is sending offline sequences (OLSs) to these devices.
Manage Firmware Versions
Firmware refers to the internal operating code for the Switch. You can maintain up to
eight firmware versions on the HAFM server for downloading to an Switch. To use the
Firmware Library option to manage firmware versions, follow the steps in the hp
StorageWorks edge switch 2/32 service manual.