edge switch 2/32 product manager user guide

5–6 edge switch 2/32 product manager user guide
Using Maintenance Features
Enable E-Mail Notification
E-mail addresses and the simple mail transfer protocol (SMTP) server address for
e-mail notification of Switch events must be configured through the HAFM
application. Refer to the hp StorageWorks ha-fabric manager user guide for
instructions on configuring e-mail.
NOTE: E-mail recipients are configured in the HAFM through the Configure E-Mail dialog box.
A valid SMTP address is configured in this dialog box.
Use the Enable E-Mail Notification function on the Product Manager to enable
e-mail notification for events that occur on a selected Switch. The default state is
disabled.
To enable e-mail notification, use the following steps:
1. Choose Enable E-Mail Notification from the Maintenance menu on the menu
bar.
2. To enable e-mail notification, choose the option to add a check mark to the check
box.
3. To disable e-mail notification, choose the option to remove the check mark from
the check box.
Enable Call-Home Notification
The call-home feature enables the HAFM server to automatically dial out to a support
center to report system problems. The support center server accepts calls from the
HAFM server, logs reported events, and notifies one or more support center
representatives.
You must enable Call-Home Event Notification through the StorageWorks HAFM
application Maintenance Menu before enabling this function through the Product
Manager for individual Directors. Two call-home options are available but only one
can be used when HAFM is installed:
• In legacy Hewlett-Packard environments, call-home notification for Directors and
Switch requires installation of Proactive Service software. This service is offered
at no additional charge for subsystems covered under an on-site warranty or
on-site storage hardware support contract. To register or order Proactive Services
software, contact your HP customer service representative.