edge switch 2/32 product manager user guide

edge switch 2/32 product manager user guide 5–7
Using Maintenance Features
• In classic HP environments, configure telephone numbers and other information
for the call-home feature through the Windows dial-up networking application.
Refer to the hp StorageWorks HAFM server installation guide for details.
Use the Enable Call Home Notification function on the Product Manager to enable
call-home notification for events that occur on the selected Switch. The default state is
disabled.
To enable call-home notification for system problems, use the following steps:
1. Choose Enable Call Home Notification from the Maintenance menu on the
menu bar to enable and disable call-home notification.
A check mark displays next to the menu option to indicate that call-home
notification is enabled.
2. Click the check box to add or remove the check mark.
Backup and Restore Configuration
Choose this option from Maintenance menu to save the product configuration stored
on the Switch to the HAFM server hard disk or to restore the product configuration
from the HAFM server. Only a single copy of the configuration is kept on the server.
The purpose of the backup is primarily for restoring configuration data to a
replacement Switch. You can also use this feature for a special purpose configuration
or for temporary testing of a configuration. You cannot modify the location and file
name of the saved configuration.
NOTE: You can only restore the configuration to a Switch with the same IP address.
Backup
1. Choose Backup and Restore Configuration from the Maintenance menu on the
menu bar to display the Backup and Restore Configuration dialog box.
Figure 5–5: Backup and Restore dialog box