edge switch 2/32 product manager user guide

6–8 edge switch 2/32 product manager user guide
Optional Features
• WWNs of Switches connected to E_Ports (E_Port connection policy). The WWN
is the WWN of the attached Switch.
• WWNs of devices connected to F_Ports and Switches connected to E_Ports
(all-ports connection policy).
Notes
• When the Switch Binding feature is first installed and has not been enabled, the
Switch Membership List is empty. When you enable Switch Binding, the
Membership List is populated with WWNs of devices, Switches, or both that are
currently connected to the Switch.
• If the Switch is offline and you activate Switch binding, the Membership List is
not automatically populated.
• Edits to the Switch Binding Membership list will be maintained when you enable
or disable Switch Binding.
After enabling Switch Binding, you prohibit devices and/or Switches from connecting
with Director or Switch ports by removing them from the Membership List in the
Switch Binding Membership List dialog box. You allow connections by adding
them to the Membership List. You can also add detached nodes and Switches.
Enable/Disable Switch Binding
1. Choose the Configure > Switch Binding > Change State from the Product
Manager window. The Switch Binding State Change dialog box displays, as
shown in Figure 6–3.
Figure 6–3: Switch Binding State Change dialog box