edge switch 2/32 product manager user guide

6–10 edge switch 2/32 product manager user guide
Optional Features
Figure 6–4: Switch Binding Membership List dialog box
Refer to Configuring Switch Binding - Overview on page 6–7 for information on how
the Switch Membership List is populated with WWNs according to options set in the
Switch Binding State Change dialog box.
2. If nicknames are configured for WWNs through HAFM and you want these to
display instead of WWNs in this dialog box, click Display Options. The Display
Options dialog box displays.
3. Click Nickname, then click OK.
4. To prohibit connection to a Switch port from a WWN currently in the
Membership List, click the WWN or nickname in the Membership List, then
click Remove. The WWN or nickname will move to the Node List panel. WWNs
can only be removed from the fabric if any of the following is true:
• The Switch is offline.
• Switch Binding is disabled.
• The Switch or device with the WWN is not connected to the Switch.