edge switch 2/32 product manager user guide

A–2 edge switch 2/32 product manager user guide
Product Manager Messages
Are you sure you want to
send firmware version?
Confirmation to add a
firmware version to the
firmware library. The
firmware library can hold
eight firmware versions.
Click Yes to confirm adding
the firmware version to the
firmware library, or no to
cancel the operation.
Cannot change Port Type
while in S/390 mode without
SANtegrity feature. Please
contact your sales
representative.
User attempted to change a
port type in the Configure
Ports dialog box while in
S/390 mode, but the
optional SANtegrity feature
is not installed.
Informational message.
Install SANtegrity before
changing port types in the
Configure Ports dialog box
while in S/390 operating
mode.
Cannot disable Switch
Binding while Enterprise
Fabric Mode is active and
the switch is Online.
User attempted to disable
switch binding through the
Switch Binding Change
State dialog box, but
Enterprise Fabric Mode is
enabled.
You must either disable
Enterprise Fabric Mode
using the Enterprise Fabric
Mode dialog box in the
HAFM application or set the
Switch offline before you
can disable Switch Binding.
Cannot enable beaconing
on a failed FRU.
Occurs when selecting
Enable Beaconing option for
a failed FRU.
Replace FRU and enable
beaconing again or enable
beaconing on operating
FRU.
Cannot enable beaconing
while the system error light
is on.
Beaconing cannot be
enabled while the system
error light is on.
Choose Clear System
Error Light from Product
menu to clear error light,
then enable beaconing.
Cannot have E-Ports
configured in S/390 mode
Unless SANtegrity feature is
installed. Please contact
your sales representative.
User attempted to change
operating mode from Open
Systems to S/390 mode with
E_Ports configured but
SANtegrity is not installed.
Informational message. If
you install SANtegrity before
changing to S/390 mode,
then E_Ports will remain as
E_Ports when you change
to S/390 mode. If SANtegrity
is not installed, setting a
Switch to S/390 mode will
change all E_Ports to
G_Ports.
Table A–1: StorageWorks Edge Switch 2/32 Product Manager Messages (Continued)
Message Description Action