edge switch 2/32 product manager user guide

edge switch 2/32 product manager user guide A–5
Product Manager Messages
Cannot set all ports to
2Gb/sec due to port speed
restriction on some ports.
Displays if you try to set
ports to operate at 2 Gb/sec
data speed through the
Configure Ports dialog box
and some ports do not
support speed configuration.
Replace ports that do not
support speed configuration
with those that do support
more than one speed
configuration.
Cannot set all ports to
Negotiate due to port speed
restriction on some ports.
Displays if you try to set all
ports to Negotiate through
the Configure Ports dialog
box and some ports do not
support speed configuration.
Replace ports that do not
support speed configuration
with those that do support
more than one speed
configuration.
Cannot set Fibre Channel
parameters.
Fibre Channel parameters
cannot be set. The link is
down or busy.
Retry the operation later. If
the condition persists,
contact support personnel.
Cannot set switch date and
time.
Switch date and time cannot
be set. The link is down or
busy.
Retry the operation later. If
the condition persists,
contact support personnel.
Cannot set switch state. Switch state cannot be set.
The link is down or busy.
Retry the operation later. If
the condition persists,
contact support personnel.
Cannot set write
authorization without
defining a community name.
A community name was not
defined in the Configure
SNMP dialog box for the
write authorization selected.
Provide a name in the name
field where write
authorization is checked.
Cannot start data collection. Data collection cannot be
started. The link is down or
busy.
Retry the operation later. If
the condition persists,
contact support personnel.
Cannot start port
diagnostics.
Port diagnostics cannot be
started. The link is down or
busy.
Retry the operation later. If
the condition persists,
contact support personnel.
Cannot swap an uninstalled
port.
A port swap cannot be
performed when the port is
not installed.
Perform a swap only on a
port that is installed.
Click OK to remove all
contents from log.
Requesting confirmation
that you want all contents
removed from the log.
Click OK to continue or
Cancel to cancel the
operation.
Table A–1: StorageWorks Edge Switch 2/32 Product Manager Messages (Continued)
Message Description Action