edge switch 2/32 product manager user guide

A–6 edge switch 2/32 product manager user guide
Product Manager Messages
Could not export log to file. A file I/O error occurred. The
log file could not be saved to
the specified destination.
Ensure filename and drive
are correct.
Could not find firmware file. Firmware file selected was
not found in the FTP
directory.
Ensure file name and
directory are correct.
Could not find firmware file. The selected file is not a
firmware file.
Obtain a valid firmware file
from your service
representative.
Could not remove dump files
from server.
Dump files could not be
removed from server. Link
may be down or Switch may
be busy.
Retry the operation later. If
the condition persists,
contact support personnel.
Could not stop port
diagnostics.
Port diagnostics could not
be stopped. Link may be
down or Switch may be
busy.
Retry the operation later. If
the condition persists,
contact support personnel.
Could not write firmware to
flash.
Firmware could not be
written to flash memory.
Try again. If problem
persists, contact support
personnel.
CUP name and port name
are identical.
Within the address
configuration, one or more
of the port names are the
same as the CUP name.
Make sure all names are
unique for the ports and
CUP name.
Date entered is invalid. Date entered incorrectly. Verify that the number of
days in the month is valid.
Device applications should
be terminated before
starting diagnostics. Press
NEXT to continue.
Device application is not
terminated.
Terminate device application
before running port
diagnostics.
Table A–1: StorageWorks Edge Switch 2/32 Product Manager Messages (Continued)
Message Description Action