edge switch 2/32 product manager user guide

edge switch 2/32 product manager user guide A–9
Product Manager Messages
Incorrect product type. When configuring a new
product through the New
Product dialog box, an
incorrect product was
selected for the network
address.
Choose the correct product
type for the product with the
network address.
Installing this feature key,
while online, will cause an
IPL operation on the switch
and a momentary loss of
LAN connection. This
operation is non-disruptive
to the Fibre Channel traffic.
Do you wish to continue
installing this feature key?
If the Switch is online,
installing the new feature
key will cause an internal
program load (IPL). The
LAN connection to the
HAFM server will be lost
momentarily, but Fibre
Channel traffic will not be
affected.
Click Yes to install the
feature key or No to not
install.
Internal file transfer error
received from switch.
Switch detected an internal
file transfer error.
Contact support personnel.
Invalid character in field. Invalid character in the input
field.
Re-enter the field
information.
Invalid configuration name. Attempted to save an
address configuration name
with an invalid name.
Use up to 24 alphanumeric
characters, including
spaces, hyphens and
underscores.
Invalid feature key. The feature key was not
recognized.
Re-enter the feature key
noting the key is case
sensitive and to include the
dashes.
Invalid firmware file. Selected file is not a
firmware file.
Choose the correct firmware
file.
Invalid network address. Network address specified
is not known by the domain
name server.
Check the input address and
specify the correct network
address.
Invalid port address. Invalid port address has
been entered.
Verify port address through
the Configure Addresses -
“Active” dialog box (S/390
mode only) and re-enter.
Table A–1: StorageWorks Edge Switch 2/32 Product Manager Messages (Continued)
Message Description Action