edge switch 2/32 product manager user guide

A–10 edge switch 2/32 product manager user guide
Product Manager Messages
Invalid port number. Port number must be within
the range of ports for the
specific Switch model.
Enter a port number within
the correct range.
Invalid port number. Valid
ports are (0 - 31).
Port number must be within
the range of ports for the
specific Switch model. For
this model, the valid port
numbers are 0 - 31.
Enter a port number within
the correct range.
Invalid port swap. Port swap selection is not
allowed.
Ensure that each port
selected for swap has not
been previously swapped.
Invalid response received
from switch.
The Switch returned an
invalid response.
Resend the firmware. If the
condition persists, contact
support personnel.
Invalid serial number for this
feature key.
The serial number and the
feature key did not match.
Ensure that the feature key
being installed is specifically
for this Switch serial
number.
Invalid UDP port number. UDP port number must be
an integer from 1 through
65535.
Enter a port number from 1
through 65535.
Invalid value for BB_Credit. BB_Credit must be an
integer from 1 through 60.
Enter a number from 1
through 60.
Invalid value for day (1 - 31). Value for day must be an
integer from 1 through 31.
Enter a value from 1 through
31.
Invalid value for E_D_TOV. Value for E_D_TOV must be
an integer from 2 through
600, measured in tenths of a
second.
Enter a value from 2 through
600.
Invalid value for hour (0 -
23).
Value for hour must be an
integer from 0 through 23.
Enter a value from 0 through
23.
Invalid value for minute (0 -
59).
Value for minute must be an
integer from 0 through 59.
Enter a value from 0 through
59.
Invalid value for month (1 -
12).
Value for month must be an
integer from 1 through 12.
Enter a value from 1 through
12.
Table A–1: StorageWorks Edge Switch 2/32 Product Manager Messages (Continued)
Message Description Action