edge switch 2/32 product manager user guide

A–12 edge switch 2/32 product manager user guide
Product Manager Messages
No firmware versions to
delete.
There are no firmware
versions in the firmware
library to delete.
N/A. An informational
message.
Non-redundant switch must
be offline to install firmware.
Since the Switch has only a
single CTP card, it must be
offline to initiate a firmware
installation. Note that the
CTP card is an internal
component and not a FRU.
Take Switch offline and try
again.
Not all of the optical
transceivers are installed for
this range of ports.
Some ports in the specified
range do not have optical
transceivers installed.
Use a port range that is valid
for the ports installed.
Performing this operation
will change the current state
to Offline.
This operation causes the
Switch to go offline.
N/A. An informational
message.
Performing this operation
will change the current state
to Online.
This operation causes the
Switch to go online.
N/A. An informational
message.
Performing this action will
overwrite the date/time on
the switch.
Warning that occurs when
configuring the date and
time through the Configure
Date and Time dialog box,
that the new time or date will
overwrite the existing time or
date set for the Switch.
Verify that you want to
overwrite the current date or
time.
Periodic Date/Time
synchronization must be
cleared before enabling
switch clock alert.
Action cannot be performed
because Periodic
Date/Time
Synchronization option is
active.
Click Periodic Date/Time
Synchronization check box
in Configure Date and
Time dialog box (Configure
menu) to clear check mark
and disable periodic
date/time synchronization.
Table A–1: StorageWorks Edge Switch 2/32 Product Manager Messages (Continued)
Message Description Action