edge switch 2/32 product manager user guide

1–2 edge switch 2/32 product manager user guide
Product Manager Overview
• conditions and no prompts display to guide users through tasks. Refer to the hp
StorageWorks CLI reference guide for directors and edge switches .
• Management using simple network management protocol (SNMP). An SNMP
agent is implemented through the SDCM application that allows administrators on
SNMP management workstations to access Switch management information
using any standard network management tool. Administrators can assign internet
protocol (IP) addresses and corresponding community names for up to six SNMP
workstations functioning as SNMP trap message recipients.
This manual provides details on the Product Manager application for the Edge Switch
2/32 only. Use this manual for the Product Manager installed on an HAFM server. For
information on the Embedded Web Server interface, see the hp StorageWorks
embedded web server user guide; for information on the CLI, see the hp StorageWorks
CLI reference guide for directors and edge switches .
Menu Options
This user’s guide provides information on the Edge Switch 2/32 Product Manager
application only. Information on the HAFM application is provided in the hp
StorageWorks ha-fabric manager user guide. Following are lists of options available
from the menu bar in both applications. References are provided to the correct
publication for detailed information on these options.
High-Availability Fabric Manager (HAFM)
Following are options available through the HAFM. For more information, refer to
Chapter 3 of the hp StorageWorks ha-fabric manager user guide.
View Tabs
•Products
• Fabrics