edge switch 2/32 product manager user guide

edge switch 2/32 product manager user guide A–15
Product Manager Messages
The data collection process
has been aborted.
User has ended the data
collection process.
N/A. An informational
message.
The default zone must be
disabled to configure.
The message displays when
the user attempts to change
the operating mode to the
open fabric mode and the
default zone is enabled.
Disable the default zone and
repeat the operation.
The HAFM server is busy
processing a request from
another Product Manager
The HAFM server could not
process the current request
because it is busy handling
a request from another
Product Manager.
Retry the operation later. If
the condition persists,
contact support personnel.
The firmware file is
corrupted.
A firmware file has corrupt
data.
Contact support personnel.
The firmware version
already exists.
Firmware version already
exists in the database.
N/A. An informational
message.
The following parameters
cannot be disabled while
Enterprise Fabric Mode is
active: Insistent Domain ID,
Rerouting Delay, Domain
RSCNs.
User attempted to disable
these parameters in the
Configure Switch
Parameters dialog box
while Enterprise Fabric
Mode is enabled.
Disable Enterprise Fabric
Mode through the
Enterprise Fabric Mode
dialog box in HAFM, then
disable the parameters
The IPL configuration
cannot be deleted.
Deletion of the IPL address
configuration was attempted
and was not allowed.
Cancel the operation.
The link to the switch is not
available.
The link from the HAFM
server to the Switch is not
available.
Check Ethernet connection.
The maximum number of
address configurations has
been reached.
The maximum number of
saved address
configurations has been
reached.
Delete configurations no
longer needed to allow new
configuration to be saved.
The optical transceiver is not
installed.
No information available for
a port that is not installed.
Ensure the optical
transceiver is installed and
fully seated.
Table A–1: StorageWorks Edge Switch 2/32 Product Manager Messages (Continued)
Message Description Action