edge switch 2/32 product manager user guide

1–20 edge switch 2/32 product manager user guide
Product Manager Overview
• Active or inactive state of the alert.
• Threshold criteria. This includes configuring the threshold as the percent of
port traffic capacity utilized (% utilization). You must also configure the time
interval during which the throughput is measured and the maximum
cumulative time that the throughput percentage threshold can be exceeded
during this time interval before an alert is generated.
Export Configuration Report
Choose this option to display the Export Configuration Report dialog box,
which enables you to specify a file name in which to save an ASCII text file
containing all current user-definable configuration options in a printable format.
Note that this file cannot be read back into the Product Manager in order to set
configuration parameters.
Enable Web Server
Choose this option to enable the Embedded Web Server interface on the Switch.
Choose the option again to disable the Embedded Web Server interface. When
disabled, users at remote workstations cannot access the interface. If enabled,
Hewlett-Packard recommends changing the user names and/or passwords from
their default values to prevent unauthorized access.
Enable Telnet
Choose this option to enable telnet access to the Switch. Choose the option again
to remove disable telnet access. When disabled, users at remote workstations
cannot access the Switch through the telnet in order to use the Command Line
Interface (CLI) or perform other tasks. If enabled, Hewlett-Packard recommends
changing the user names and/or passwords from their default values to prevent
unauthorized access.
Logs Menu
Click the Logs menu from the menu bar to display the following options. For detailed
information on using these dialog boxes, refer to Using Logs on page 4-1.