edge switch 2/32 product manager user guide

edge switch 2/32 product manager user guide 1–21
Product Manager Overview
Audit Log
This log provides a record of all configuration changes made on the Switch. Each
entry displays the date and time of the change, a description of the change, the
source of the change (such as the HAFM server or SNMP management station),
and an identifier for the source, such as the IP address of the HAFM server or
SNMP management station.
Event Log
Choose this option to display the Switch event log. This log provides a record of
significant events that have occurred on the Switch, such as hardware failures,
degraded operation, and port problems. Each entry includes the date and time of
the event, a reason code for the event, the severity level, a brief description, and up
to 32 bytes of supplementary event data. Refer to the hp StorageWorks edge switch
2/32 service manual for more information.
Hardware Log
This log displays information on FRUs inserted and removed from the Switch.
Each log entry includes the name of the FRU inserted or removed, the slot
position relative to identical FRUs installed, whether the FRU was inserted or
removed, the FRU part number and serial number, and the date and time the FRU
was inserted or removed.
Link Incident Log
The link incident (LIN) log displays the most recent incidents with their date and
time, port number, and description of the incident. A link incident can be one of
several conditions detected on a fiber optic link. For a list of events that may cause
a link incident to be written to the log, refer to Link Incident Log on page 4-7.
Threshold Alert Log
This log provides notifications of threshold alerts. Besides the date and time that
the alert occurred, it also displays information that was configured through the
Configure Threshold Alert(s) option under the Configure menu. This includes
the alert name, port for which the alert is configured. the type of alert (transmit
throughput, receive throughput, or both), threshold utilization of traffic capacity,
minutes the threshold was configured for, and the configured time interval for the
threshold. For more details on this log, refer to Threshold Alert Log on page 4-8.