edge switch 2/32 product manager user guide

1–22 edge switch 2/32 product manager user guide
Product Manager Overview
Maintenance Menu
Click the Maintenance menu on the menu bar to display the following options. For
detailed information on using these dialog boxes, refer to Chapter 5, Using
Maintenance Features.
Port Diagnostics
This option displays the Port Diagnostics dialog box. Use this dialog box to run
internal and external loopback tests on ports. Refer to the hp StorageWorks edge
switch 2/32 service manual for instructions.
Swap Ports
S/390 mode only. Choose this option to display the Swap Ports dialog box. Use
this dialog box to swap one port address for another.
Data Collection
This option displays the Save Data Collection dialog box. Use this dialog box to
collect maintenance data into a file. This file is used by support personnel to
diagnose system problems. Refer to the hp StorageWorks edge switch 2/32 service
manual for instructions.
IPL
Choose this option to initiate an initial program load on the Switch. A dialog box
displays to allow you to confirm the IPL. Note that an IPL does not affect any
configuration settings done through the Product Manager. Port operation is
interrupted during the IPL.
Refer to Execute an IPL on page 5-3 for more information.
Set Online State
Choose this option to display the Set Online State dialog box. Use this dialog box
to change the online state of the Switch to offline or online.