edge switch 2/32 product manager user guide

1–24 edge switch 2/32 product manager user guide

Product Manager Overview

Backup & Restore Configuration

Choose this option to save the product configuration stored on the Switch to the

HAFM server hard disk or to restore the configuration data from the HAFM

server. Only a single copy of the configuration is kept on the server.

This backup is primarily for single-CTP systems, where a backup is needed to

restore the configuration data to a replacement CTP card. You cannot modify the

location or the file name of the saved configuration.

NOTE: You can only restore the configuration to a Switch with the same IP address.

For additional information on using this option, refer to Backing Up and Restoring

Configuration Data on page 3-37.

Reset Configuration

Choose this option to reset all Switch configuration data back to the factory

defaults. A confirmation dialog box displays with a warning upon choosing the

option. For additional information on using this option, refer to Reset

Configuration on page 5-9.

CAUTION: This operation resets all configuration including any optional features that

have been installed. You will need to re-enter your feature key to enable all optional

features after resetting the configuration.

Help Menu

Click the Help menu on the menu bar to display the following options.

Contents

Choose this option to display the Help window. The Help window contains

Contents, Index, and Glossary buttons and hypertext- linked items to help you

quickly navigate through information. Use the forward (>) and back (<) buttons to

scroll forward and backward through the displayed help frames. Exit the help

feature at any time by clicking the Close selection at the top of the Help window.

About

Choose this option to display the version number for the Product Manager and