edge switch 2/32 product manager user guide

edge switch 2/32 product manager user guide 2–13
Monitoring and Managing the Switch
• Product model number
• Product manufacturer
• Product serial number
• Engineering change (EC) level
• Firmware level
• Operating Mode
• Preferred Domain ID — This is set through the Configure Operating
Parameters dialog box
• Active Domain ID —The actual domain ID assigned to the Switch
• Switch Speed — This is always 2 Gb/sec
• FC Address DomainID — Hexadecimal value indicating FC address domain
• CTP StateID — Active or Inactive
• Switch Binding — Enabled if the optional SANtegrity features are installed and
enabled; otherwise, disabled displays
Using Menu Options
Right-click various parts of the Hardware view to display menu options for
displaying status and information and for controlling the Switch and various hardware
components.
Switch Menu
Right-click any area of the Switch illustration where a FRU hardware component is
not installed to display the following menu options.
Switch Properties
Click to display the Switch Properties dialog box. This dialog box contains the
Switch name, description, location, and contact person configured through the
Configure Identification dialog box. Also included is other product information as
detailed in Displaying Switch Information on page 2-12. You can also display this
dialog box by double-clicking an area on the illustration away from a hardware
component.