Fabric Watch Administrator's Guide v6.4.0 (53-1001770-01, June 2010)

Fabric Watch Administrator’s Guide 89
53-1001770-01
Switch monitoring
8
Switch monitoring
Before entering the switchStatusPolicySet command, plan your switch status policy. Determine
your system requirements and the factors that affect its monitors.
Switch status policy planning
Table 27 lists the monitors in a switch and identifies the factors that affect their health. Note that
not all switches use the listed monitors.
TABLE 27 Switch status policy factors
Monitor Health factors
Power Supplies Power supply thresholds detect absent or failed power supplies, and power supplies that are
not in the correct slot for redundancy.
When intelligent blades like the FR4-18i are in the 48000 chassis, the 48000 operates in
high power mode, which means that four power supplies are required for redundancy. In
high power mode, Fabric Watch assumes a policy setting of 2,1, meaning that the switch
goes to a Down state if two power supplies fail, and goes to a Marginal state when one
power supply fails. Fabric Watch automatically changes the policy setting to 2,1 when an
FR-18i, FC4-16IP, or FA4-18 blade is detected. If the blade is removed, the policy remains
set to 2,1.
The presence of four or more FS8-18 encryption blades in the DCX Data Center Backbone
causes the Fabric Watch switch status policy for power supplies to assume a policy setting
of 2,1, as with the blades listed above. Use the switchstatuspolicyset command if you need
to manually change the policy setting.
Temperatures Temperature thresholds, faulty temperature sensors.
Fans Fan thresholds, faulty fans.
WWN Faulty WWN card (applies to modular switches).
CP Switch does not have a redundant CP (applies to modular switches).
Blades Faulty blades (applies to modular switches).
Flash Flash thresholds.
Marginal Ports Port, E_Port, FOP_port (optical), and FCU_Port (copper) port thresholds. Whenever these
thresholds are persistently high, the port is Marginal.
Faulty Ports Hardware-related port faults.
Missing SFPs Ports that are missing SFP media.