Fabric Watch Administrator's Guide v6.4.0 (53-1001770-01, June 2010)

Fabric Watch Administrator’s Guide 103
53-1001770-01
Port threshold configuration using the fwConfigure command
A
4. Enter the number corresponding to the area that you want to configure, such as 7 for
RXPerformance.
1 : Link loss
2 : Sync loss
3 : Signal loss (not supported)
4 : Protocol error
5 : Invalid words
6 : Invalid CRCS
7 : RXPerformance
8 : TXPerformance
9 : State Changes
10 : Link reset
11 : return to previous page
Select an area => : (1..10) [10] 7
Fabric Watch displays a list of monitored elements in this area. The following sample output
shows the monitored elements in the RXPerformance area menu.
Index ThresholdName Port CurVal Status
LastEvent LasteventTime LastVal LastState
============================================================================
216 eportRXPerf216 8/24 0 Percentage(%)/min enabled
inBetween Tue Jun 2 14:21:01 2009 0 Percentage(%)/min Informative
217 eportRXPerf217 8/25 0 Percentage(%)/min enabled
inBetween Tue Jun 2 14:21:07 2009 0 Percentage(%)/min Informative
218 eportRXPerf218 8/26 0 Percentage(%)/min enabled
inBetween Tue Jun 2 14:21:07 2009 0 Percentage(%)/min Informative
219 eportRXPerf219 8/27 0 Percentage(%)/min enabled
inBetween Tue Jun 2 14:21:07 2009 0 Percentage(%)/min Informative
220 eportRXPerf220 8/28 0 Percentage(%)/min enabled
inBetween Tue Jun 2 14:21:07 2009 0 Percentage(%)/min Informative
221 eportRXPerf221 8/29 0 Percentage(%)/min enabled
inBetween Tue Jun 2 14:21:07 2009 0 Percentage(%)/min Informative
222 eportRXPerf222 8/30 0 Percentage(%)/min enabled
inBetween Tue Jun 2 14:21:07 2009 0 Percentage(%)/min Informative
223 eportRXPerf223 8/31 0 Percentage(%)/min enabled
inBetween Tue Jun 2 14:21:07 2009 0 Percentage(%)/min Informative
where:
See Chapter 3, “Fabric Watch Threshold Components,” for details about classes and areas.
Index A numeric identifier assigned to the element.
ThresholdName A string identifier assigned to the element.
Port The user port number.
CurVal The current data value contained by the element.
Status Monitoring status, either enabled or disabled.
LastEvent The last event setting that triggered an event.
LasteventTime The timestamp of the last triggered event for the element.
LastVal The data value of the element at the time of the last event.
LastState The last detected state of the element.