Fabric Watch Administrator's Guide v6.4.0 (53-1001770-01, June 2010)

34 Fabric Watch Administrator’s Guide
53-1001770-01
Fabric Watch configuration tasks
5
Set the following parameters for port
monitoring:
• Port type
• Area type
• Time base
• Threshold level
• Trigger (boundary level)
• Action (notification type)
• Buffer
• Port persistence
• Port fencing
portThConfig
portFencing
Chapter 7, “Port Monitoring”
Set the port persistence time fwSet --port -persistence “Setting the port persistence time” on
page 74
Configure port fencing portFencing “Port fencing” on page 74
Set the following parameters for system
monitoring:
• Class
• Area type
• Threshold level
• Trigger (boundary level)
• Action (notification type)
• Buffer
sysMonitor “System monitoring using the
sysMonitor command” on page 85.
Set and display the switch status policy
parameters.
switchStatusPolicySet
switchStatusPolicyShow
Chapter 8, “System Monitoring”
Show the overall switch status. switchStatusShow Chapter 8, “System Monitoring”
Configure FRU state and notifications. fwFruCfg Chapter 8, “System Monitoring”.
Display fan status fanShow Chapter 8, “System Monitoring”
Show sensor readings sensorShow Chapter 8, “System Monitoring”
Show switch temperature readings tempShow Chapter 8, “System Monitoring”
Create a detailed port report. fwPortDetailShow “Generating a Port Detail report” on
page 99.
Show the availability of monitor
information.
fwSamShow “Switch Availability Monitor report” on
page 96.
TABLE 2 Fabric Watch configuration tasks (Continued)
Configuration task Command Location of procedure