Fabric Watch Administrator's Guide v6.4.0 (53-1001770-01, June 2010)

54 Fabric Watch Administrator’s Guide
53-1001770-01
Recommended settings for Fabric, SFP, Performance, and Security monitoring
6
Recommended settings for Fabric, SFP, Performance,
and Security monitoring
Table 13 lists the recommended settings for the Fabric, SFP, Security, and Performance classes
discussed in this chapter. For all of these classes, it is recommended that you use the default
settings.
TABLE 13 Recommended settings for Fabric, SFP, Performance, and Security monitoring
E=Error_Log, S=SNMP_Trap,
P=Port_LOG_LOCK,
M=EMAIL_ALERT, F=Port Fence
Trait Configuration
Class
Area
Default
Custom
Unit
Time Base
Low Thresh
High Thresh
Buffer
Default
Custom
Changed
Below Above
In-between
Notes
Fabric E_Port downsX Downs None000X
Fabric reconfigX Reconfigs None000X
Domain ID
changes
X DID changesNone000X
SegmentationX SegmentationsNone000X
Zone changesX Zone changesNone000X
Fabric loginsX Logins None000X
SFP Temperature X C None -10 85 3 X E E E
RX power X uWatts None 0 5000 25 X E E E
TX power X uWatts None 0 5000 25 X E E E
Current X mA None 0 50 1 X E E E
Voltage X uV None 3150 3600 10 X E E E
SFP state
changes
X Changes None000X
End-to-End
Performance
RX
Performance
X KB/s None000X
TX PerformanceX KB/s None000X
Filter-based
Performance
Custom Filter
Counter
X Frames None000X