958-000290-003, March 2005)

Edge Switch 2/32 installation guide 35

Record or verify HAFM appliance restore information

Configuration information must be recorded to restore the HAFM appliance in case of hard drive

failure. The Windows operating system and the HAFM and Element Manager application must also

be restored. Refer to the HP StorageWorks HA-Fabric Manager appliance installation guide for

instructions.

To record or verify HAFM appliance configuration information, refer to the appropriate HAFM

appliance installation for instructions.

Enabling HAFM to manage the switch

To manage a new switch, it must be identified to the HAFM appliance. To identify the new switch:

1. At the HAFM application (Element manager or EWS main window), select Setup from the

Discover menu. The Discover Setup dialog box is displayed (Figure 14).

Figure 14 Discover Setup dialog box

2. Click Add. The Domain Information dialog box is displayed with the IP Address page open by

default (Figure 15).

Figure 15 Domain Information dialog box (IP Address page)

3. Enter a switch description (for example, edge-32) the Description field.