958-000290-003, March 2005)

Edge Switch 2/32 installation guide 39

2. Click OK to synchronize the date and time and close the Date and Time Synced dialog box, then

click Activate to enable synchronization and close the Configure Date and Time dialog box.

Frequently used HAFM settings

This section summarizes the most common HAFM tasks, including:

NOTE: For a complete reference on HAFM functionality, refer to the HP StorageWorks HA-Fabric

Manager user guide.

• Set the switch online, page 39

• Set the switch offline, page 40

• Configure switch identification, page 40

• Configure switch management style, page 41

• Configure Switch Operating Parameters, page 42

• Configure fabric operating parameters, page 44

• Configure switch binding, page 47

• Configure ports (Open Systems management style), page 47

• Configure ports (FICON management style), page 51

• Configure port addresses (FICON), page 52

• Configure SNMP trap message recipients, page 53

• Configure, enable, and test e-mail notification, page 54

• Configure and enable call-home features, page 56

• Configure and enable ethernet events, page 56

• Configure threshold alerts, page 57

• Configure Open Systems management appliance, page 64

• Configure FICON management appliance, page 64

• Configure feature key, page 64

• Configure Open Trunking, page 64

• Enable Embedded Web Server, page 64

• Enable Telnet, page 64

Set the switch online

When the switch is set online, an attached device can log into the switch if the port is not blocked.

Attached devices can communicate with each other if they are configured in the same zone. Use

these steps to set the switch online:

1. Open HAFM. The Products View page is displayed.

2. Double-click the appropriate switch icon. The Hardware View page for the selected switch is

displayed.