958-000290-003, March 2005)

Edge Switch 2/32 installation guide 59

2. Click New. The New Threshold Alert dialog box is displayed, as shown in Figure 32.

Figure 32 New Threshold Alerts dialog box

—first screen

3. Enter a name from one to 64 characters in length in the Threshold Alert Name field. All

characters in the ISO Latin-1 character set, excluding control characters, are allowed.

4. Select one of the following from the Threshold Type drop-down list:

• Transmit—An alert will occur if the threshold set for transmit throughput is reached.

• Receive—An alert will occur if the threshold set for receive throughput is reached

• Receive and Transmit—An alert will occur if the threshold set for either receive or transmit

throughput is reached.

5. Click Next. A new screen is displayed with additional parameters, as shown in Figure 33. The

name configured for the alert appears at the top of the screen.

NOTE: Click Previous if you need to return to the previous screen.

Figure 33 New Threshold Alerts dialog box—second screen