958-000290-003, March 2005)

Edge Switch 2/32 installation guide 63

Configure SANtegrity authentication

Use this optional feature to configure authentication security settings. You configure these setting

using the SANtegrity Authentication dialog box.

NOTE: You must have Administrator privileges to access the SANtegrity Authentication dialog box.

To access the SANtegrity Authentication dialog box:

From the Element Manager window, select Configure > SAN

tegrity Authentication. The SANtegrity

Authentication dialog box is displayed (Figure 37).

Figure 37 SANtegrity Authorization dialog box

This dialog box contains five tabs:

• Users—Allows you to setup users who access the switch from CLI and Web interfaces.

• Software—Allows you to setup software applications that communicate with the switch

through API, as well as OSMS authentication.

• Devices—Allows you to set device-to-device authentication parameters. The Devices tab is

preferred path PFE key enabled. If a proper PFE key is not provided, the Devices tab is not

accessible. See ”Configure feature key” on page 64 for more information.

• IP Access Control—Allows you to setup IP addresses that can manage the switch.

• Radius Servers—Allows you to set Radius server parameters that the switch uses to

communicate the authentication information to the designated Radius servers.

For information about using each of these tabs, see the online Help.