958-000290-003, March 2005)

Installing and configuring the Edge Switch 2/3268

• Ethernet network adapter.

• Java-enabled Internet browser, such as Microsoft Internet Explorer (Version 4.0 or later) or

Netscape Navigator (Version 4.0 or later).

Install HAFM client on a remote workstation

Use these steps to install HAFM on a remote client:

1. Verify that the workstation and the Ethernet LAN segment (with the Edge Switch 2/32 attached)

are connected through the Internet.

2. At the workstation, launch the browser application.

3. At the browser, enter the HAFM appliance IP address.

4. The HAFM splash screen is displayed with the following options, see Figure 39.

a. Install HAFM remote client application—Select this option to install the application for your

workstation platform.

b. Download SNMP MIB files—The Management Information Base (MIB) files are provided in

standard ASN.1 syntax and may be installed into the MIB database of any SNMPv2

compliant Network Management Station.

Figure 39 HAFM remote client install

5. To install the remote client application, scroll down to the information that pertains to your

platform, and follow the instructions provided.

6. After you have downloaded the installer executable, the InstallAnywhere Wizard is displayed.

Follow the instructions provided to continue the installation.