958-000290-003, March 2005)

Edge Switch 2/32 installation guide 83

To configure passwords:

1. Select Configure > Security to display the Authorize Users (Auth Users) tab (Figure 51).

Figure 51 Auth Users tab

2. Under Current User Records, enter the new password in the New Password column. Use 16 or

fewer alphanumeric characters.

3. Enter the new password in the Confirm New Password column.

4. Select the appropriate role for the user from the Role drop-down list: Administrator, Operator, or

No Role.

5. Click the Include CLI box to authorize the user to use the CLI.

6. Click Activate to activate save the information. The message Your changes to the Auth

Users configuration have been successfully activated. Login may be

required. is displayed.

Reset configuration data

1. Notify the customer the switch is to be set offline. Ensure that the customer’s system administrator

quiesces Fibre Channel frame traffic through the switch and sets attached FC-AL devices offline.

2. At the HAFM appliance, open the HAFM appliance application.

3. Set the switch offline. For instructions, refer to ”Set the switch offline” on page 40.

4. At the HAFM application’s physical map, right-click the product icon representing the switch for

which a configuration file is to be reset to factory default settings, then select Element Manager

from the pop-up menu. The application opens.