958-000290-003, March 2005)

Using the Embedded Web Server84

5. Select the Reset Configuration option from the Maintenance menu. The Reset Configuration

dialog box is displayed (Figure 52).

Figure 52 Reset Configuration dialog box

6. Click Reset to initiate the reset operation and close the dialog box.

7. The switch IP address resets to the default address of 10.1.1.10.

• If the configured IP address (prior to reset) was the same as the default address, the

switch-to-management appliance Ethernet link is not affected and the procedure is complete.

• If the configured IP address (prior to reset) was not the same as the default address, the

switch-to-management appliance Ethernet link drops and server communication is lost.

Continue to the next step.

8. To change the switch IP address and restart the management appliance session, go to step 10.

9. To restart a management appliance session using the default IP address of 10.1.1.10:

a. Close the Element Manager application and return to the HAFM application.

b. A grey square with a yellow exclamation mark appears adjacent to the icon representing the

reset switch, indicating switch is not communicating with the HAFM appliance.