958-000290-003, March 2005)

Edge Switch 2/32 installation guide 85

c. At the HAFM application, select Discover > Setup. The Discover Setup page is displayed

(Figure 53).

Figure 53 Discover Setup page

d. Select (highlight) the entry representing the reset switch in the Available Addresses window

and click Change. The Domain Information dialog box is displayed (Figure 54).

Figure 54 Domain Information dialog box

a. Enter 10.1.1.10 in the IP Address field and click OK. Entries at the Discover Setup dialog box

reflect the new IP address.

b. At the Discover Setup dialog box, click OK. Switch-to-management appliance communication

is restored and the procedure is complete.