958-000290-003, March 2005)

Edge Switch 2/32 installation guide 89

3. Select Firmware Library from the Maintenance menu. The Firmware Library dialog box is

displayed (Figure 56).

Figure 56 Firmware Library dialog box

4. Click New. The New Firmware Version dialog box is displayed (Figure 57).

Figure 57 New Firmware Version dialog box

5. Select the desired firmware version file (downloaded in step 1) from the HAFM appliance

backup drive, CD-ROM drive, or hard drive. Verify that the correct directory path and filename

display in the File name field and click Save. The New Firmware Description dialog box is

displayed (Figure 58).

Figure 58 New Firmware Description dialog box

6. Enter a description (up to 24 characters in length) for the new firmware version and click OK. HP

recommends the description include the installation date and text that uniquely identifies the

firmware version.

7. Click OK. The File Transfer message box is displayed. As the transfer progresses, a progress bar

travels across the message box to show percent completion.

8. A Transfer Complete message box is displayed indicating the new firmware version is stored on

the HAFM appliance hard drive. Click Close to close the message box.

9. The new firmware version and associated description display in the Switch Firmware Library

dialog box.