FW 08.01.00 McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual (620-000155-220, November 2005)

2
Task 7: Configure Management Server Password and Network Addresses
2-27
Installation Tasks
Configure Private
LAN Addresses
To configure TCP/IP network information for the private LAN
connection (LAN 2):
1. At the management server’s LCD panel, press ENTER. The
Welcome!! or operational information message changes to the
following (Figure 2-16):
Figure 2-16 LCD Panel (Password Entry)
2. Using the button to increment a digit, the button to
decrement a digit, the button to move the cursor left,
and the button to move the cursor right, input the default or
changed password, and press ENTER. The LAN 1 Setting??
message appears at the LCD panel.
3. Press the button. The LAN 2 Setting?? message appears at the
LCD panel. Press ENTER and the following message appears
(Figure 2-17) with the default IP address of 10.1.1.1.
Figure 2-17 LCD Panel (LAN 2 IP Address)
4. Use the arrow keys as described in step 2 to input a new IP
address, then press ENTER. The following message appears
(Figure 2-18):
Figure 2-18 LCD Panel (Save Change)
5. Press ENTER. The LAN 2 IP address changes and the following
message appears (Figure 2-19) with the default subnet mask of
255.0.0.0.
Input Password:
0****
Input IP:
010.001.001.001
Save Change?
Yes, Save !!