FW 08.01.00 McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual (620-000155-220, November 2005)
Table Of Contents
- Preface
- General Information
- Installation Tasks
- Factory Defaults
- Installation Options
- Summary of Installation Tasks
- Task 1: Verify Installation Requirements
- Task 2: Unpack, Inspect, and Install the Ethernet Hub (Optional)
- Task 3: Unpack, Inspect, and Install the Switch
- Task 4: Configure Network Information
- Task 5: LAN-Connect the Switch
- Task 6: Unpack, Inspect, and Install the Management Server
- Task 7: Configure Management Server Password and Network Addresses
- Task 8: Configure Management Server Information
- Task 9: Configure Windows 2000 Users
- Task 10: Set Management Server Date and Time
- Task 11: Configure the Call-Home Feature (Optional)
- Task 12: Assign User Names and Passwords
- Task 13: Configure the Switch to the Management Application
- Task 14: Record or Verify Management Server Restore Information
- Task 15: Verify Switch-to-Management Server Communication
- Task 16: Configure PFE Key (Optional)
- Task 17: Configure Management Server (Optional)
- Flexport
- Open Trunking
- Task 18: Set Switch Date and Time
- Task 19: Configure the Sphereon 3032/3232 Element Manager Applications
- Task 20: Configure Switch Operating Parameters
- Task 21: Configure Fabric Operating Parameters
- Fabric Parameters
- Configure Ports (Open Systems Mode)
- Configure Ports (FICON Mode)
- Configure Port Addresses (FICON Mode)
- Configure SNMP Trap Message Recipients
- Configure and Enable E-mail Notification
- Configure and Enable Ethernet Events
- Configure and Enable Call-Home Event Notification
- Configure Threshold Alerts
- Procedures
- Task 22: Configure Open Trunking
- Task 23: Test Remote Notification (Optional)
- Task 24: Back Up Configuration Data
- Task 25: Configure the Switch from the EFCM Basic Interface (Optional)
- Configure Product Identification
- Configure Date and Time
- Configure Parameters
- Configure Fabric Parameters
- Configure Network Information
- Configure Basic Port Information
- Configure Port BB_Credit
- Configure Port NPIV
- Configure SNMP
- Enable CLI
- Enable or Disable Host Control
- Configure SSL Encryption
- Install PFE Keys (Optional)
- Configure Security
- Configure Interswitch Links
- Task 5: Configure Product Network Information (Optional)
- Task 26: Cable Fibre Channel Ports
- Task 27: Connect Switch to a Fabric Director (Optional)
- Task 28: Register with the McDATA File Center
- Diagnostics
- Maintenance Analysis Procedures
- MAP 0000: Start MAP
- MAP 0100: Power Distribution Analysis
- MAP 0200: POST, Reset, or IPL Failure Analysis
- MAP 0300: Console Application Problem Determination
- MAP 0400: Loss of Console Communication
- MAP 0500: Fan and CTP Card Failure Analysis
- MAP 0600: Port Failure and Link Incident Analysis
- MAP 0700: Fabric, ISL, and Segmented Port Problem Determination
- MAP 0800: Server Hardware Problem Determination
- Repair Information
- Factory Defaults
- Procedural Notes
- Using Log Information
- Using Views
- FRU List View
- Performing Port Diagnostics
- Swapping Ports
- Collecting Maintenance Data
- Clean Fiber-Optic Components
- Power-On Procedure
- Power-Off Procedure
- Reset or IPL the Switch
- Set the Switch Online or Offline
- Block and Unblock Ports
- Manage Firmware Versions
- Manage Configuration Data
- Install or Upgrade Software
- FRU Removal and Replacement
- Illustrated Parts Breakdown
- Messages
- Event Code Tables
- Restore EFC Server
- Consolidating EFC Servers in a Multiswitch Fabric
- Glossary
- Index

2
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Figures
2-21 LCD Panel (Password Entry) .................................................................... 2-28
2-22 LCD Panel (LAN 1 IP Address) ................................................................ 2-29
2-23 LCD Panel (Save Change) .......................................................................... 2-29
2-24 LCD Panel (LAN 1 Subnet Mask) ............................................................. 2-29
2-25 LCD Panel (Save Change) .......................................................................... 2-29
2-26 VNC Authentication Screen ...................................................................... 2-30
2-27 Welcome to Windows Dialog Box ............................................................ 2-31
2-28 Log On to Windows Dialog Box ............................................................... 2-31
2-29 SANavigator Log In or EFCM 8 Log In Dialog Box ............................... 2-32
2-30 Control Panel Window ............................................................................... 2-33
2-31 System Properties Dialog Box (Network Identification Tab) ............... 2-34
2-32 Identification Changes Dialog Box ........................................................... 2-34
2-33 Network and Dial-up Connections Window .......................................... 2-35
2-34 Local Area Connection 2 Status Dialog Box ............................................ 2-36
2-35 Local Area Connection 2 Properties Dialog Box .................................... 2-36
2-36 Internet Protocol (TCP/IP) Properties Dialog Box ................................. 2-37
2-37 Users and Passwords Dialog Box ............................................................. 2-39
2-38 Windows Security Dialog Box .................................................................. 2-40
2-39 Change Password Dialog Box ................................................................... 2-40
2-40 Add New User Wizard (First Window) .................................................. 2-41
2-41 Add New User Wizard (Second Window) .............................................. 2-42
2-42 Add New User Wizard (Third Window) ................................................ 2-42
2-43 EFCSERVER\srvacc Properties Dialog Box (General Tab) .................. 2-43
2-44 EFCSERVER\srvacc Properties Dialog Box (Group Membership Tab) .....
2-44
2-45 Date/Time Properties Dialog Box ............................................................ 2-45
2-46 Date/Time Properties Dialog Box, Time Zone ....................................... 2-45
2-47 Call Home Configuration Dialog Box ...................................................... 2-47
2-48 Main Window (SANavigator 4.0 or EFCM 8.0) ...................................... 2-48
2-49 SANavigator or EFCM 8 Server Users Dialog Box ................................ 2-49
2-50 Add User Dialog Box .................................................................................. 2-49
2-51 Discover Setup Dialog Box ........................................................................ 2-51
2-52 Domain Information Dialog Box (IP Address Page) .............................. 2-52
2-53 System Properties Dialog Box (General Tab) .......................................... 2-54
2-54 Switch Hardware View .............................................................................. 2-56
2-55 Configure Feature Key Dialog Box ........................................................... 2-57
2-56 New Feature Key Dialog Box .................................................................... 2-57
2-57 Enable Feature Key Dialog Box ................................................................. 2-58
2-58 Warning Dialog Box ................................................................................... 2-58
2-59 Configure Open Systems Management Server Dialog Box .................. 2-60
2-60 Configure FICON Management Server Dialog Box ............................... 2-61
2-61 Switch Binding State Change Dialog Box ................................................ 2-64
2-62 Switch Binding Membership List Dialog Box ......................................... 2-66










