FW 08.01.00 McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual (620-000155-220, November 2005)
Table Of Contents
- Preface
- General Information
- Installation Tasks
- Factory Defaults
- Installation Options
- Summary of Installation Tasks
- Task 1: Verify Installation Requirements
- Task 2: Unpack, Inspect, and Install the Ethernet Hub (Optional)
- Task 3: Unpack, Inspect, and Install the Switch
- Task 4: Configure Network Information
- Task 5: LAN-Connect the Switch
- Task 6: Unpack, Inspect, and Install the Management Server
- Task 7: Configure Management Server Password and Network Addresses
- Task 8: Configure Management Server Information
- Task 9: Configure Windows 2000 Users
- Task 10: Set Management Server Date and Time
- Task 11: Configure the Call-Home Feature (Optional)
- Task 12: Assign User Names and Passwords
- Task 13: Configure the Switch to the Management Application
- Task 14: Record or Verify Management Server Restore Information
- Task 15: Verify Switch-to-Management Server Communication
- Task 16: Configure PFE Key (Optional)
- Task 17: Configure Management Server (Optional)
- Flexport
- Open Trunking
- Task 18: Set Switch Date and Time
- Task 19: Configure the Sphereon 3032/3232 Element Manager Applications
- Task 20: Configure Switch Operating Parameters
- Task 21: Configure Fabric Operating Parameters
- Fabric Parameters
- Configure Ports (Open Systems Mode)
- Configure Ports (FICON Mode)
- Configure Port Addresses (FICON Mode)
- Configure SNMP Trap Message Recipients
- Configure and Enable E-mail Notification
- Configure and Enable Ethernet Events
- Configure and Enable Call-Home Event Notification
- Configure Threshold Alerts
- Procedures
- Task 22: Configure Open Trunking
- Task 23: Test Remote Notification (Optional)
- Task 24: Back Up Configuration Data
- Task 25: Configure the Switch from the EFCM Basic Interface (Optional)
- Configure Product Identification
- Configure Date and Time
- Configure Parameters
- Configure Fabric Parameters
- Configure Network Information
- Configure Basic Port Information
- Configure Port BB_Credit
- Configure Port NPIV
- Configure SNMP
- Enable CLI
- Enable or Disable Host Control
- Configure SSL Encryption
- Install PFE Keys (Optional)
- Configure Security
- Configure Interswitch Links
- Task 5: Configure Product Network Information (Optional)
- Task 26: Cable Fibre Channel Ports
- Task 27: Connect Switch to a Fabric Director (Optional)
- Task 28: Register with the McDATA File Center
- Diagnostics
- Maintenance Analysis Procedures
- MAP 0000: Start MAP
- MAP 0100: Power Distribution Analysis
- MAP 0200: POST, Reset, or IPL Failure Analysis
- MAP 0300: Console Application Problem Determination
- MAP 0400: Loss of Console Communication
- MAP 0500: Fan and CTP Card Failure Analysis
- MAP 0600: Port Failure and Link Incident Analysis
- MAP 0700: Fabric, ISL, and Segmented Port Problem Determination
- MAP 0800: Server Hardware Problem Determination
- Repair Information
- Factory Defaults
- Procedural Notes
- Using Log Information
- Using Views
- FRU List View
- Performing Port Diagnostics
- Swapping Ports
- Collecting Maintenance Data
- Clean Fiber-Optic Components
- Power-On Procedure
- Power-Off Procedure
- Reset or IPL the Switch
- Set the Switch Online or Offline
- Block and Unblock Ports
- Manage Firmware Versions
- Manage Configuration Data
- Install or Upgrade Software
- FRU Removal and Replacement
- Illustrated Parts Breakdown
- Messages
- Event Code Tables
- Restore EFC Server
- Consolidating EFC Servers in a Multiswitch Fabric
- Glossary
- Index
g-22
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Glossary
fiber optics The branch of optical technology concerned with the transmission of
radiant power through fibers of transparent materials such as glass,
fused silica, or plastic (E). Telecommunication applications of fiber
optics use optical fibers. A single fiber or a nonspatially aligned fiber
bundle is used for each information channel. Such fibers are often
called optical fibers to differentiate them from fibers that are used in
noncommunication applications (D).
fibre A generic Fibre Channel term used to cover all transmission media
types specified in the Fibre Channel Physical Layer (FC-PH) standard
such as optical fiber, copper twisted pair, and copper coaxial cable.
Fibre Channel FC. Integrated set of standards recognized by American National
Standards Institute (ANSI) which defines specific protocols for flexi-
ble information transfer. Logically, a point-to-point serial data chan-
nel, structured for high performance.
Fibre Channel
adapter
FC adapter. See host bus adapter.
Fibre Channel address A 3-byte node port (N_Port) identifier which is unique within the
address domain of a fabric. Each port may choose its own identifier,
or the identifier may be assigned automatically during fabric login.
Fibre Channel
Association
FCA. The FCA is a non-profit corporation consisting of over 150
members throughout the world. Its mission is to nurture and help
develop the broadest market for Fibre Channel products through
market development, education, standards monitoring, and fostering
interoperability among members’ products.
Fibre Channel fabric
element
FCFE. Any device linked to a fabric.
Fibre Channel fabric
element
management
information base
FCFE-MIB. A table of variables available to network management
stations and resident on a switch or director. Through the simple net-
work management protocol (SNMP) these pointers can be manipu-
lates to monitor, control, and configure the switch or director.
Fibre Channel Industry
Association
FCIA. A corporation consisting of over 100 computer indus-
try-related companies. Its goal is to provide marketing support,
exhibits, and tradeshows for its member companies. The FCIA com-
plements activities of the various standards committees.