FW 08.01.00 McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual (620-000155-220, November 2005)
Table Of Contents
- Preface
- General Information
- Installation Tasks
- Factory Defaults
- Installation Options
- Summary of Installation Tasks
- Task 1: Verify Installation Requirements
- Task 2: Unpack, Inspect, and Install the Ethernet Hub (Optional)
- Task 3: Unpack, Inspect, and Install the Switch
- Task 4: Configure Network Information
- Task 5: LAN-Connect the Switch
- Task 6: Unpack, Inspect, and Install the Management Server
- Task 7: Configure Management Server Password and Network Addresses
- Task 8: Configure Management Server Information
- Task 9: Configure Windows 2000 Users
- Task 10: Set Management Server Date and Time
- Task 11: Configure the Call-Home Feature (Optional)
- Task 12: Assign User Names and Passwords
- Task 13: Configure the Switch to the Management Application
- Task 14: Record or Verify Management Server Restore Information
- Task 15: Verify Switch-to-Management Server Communication
- Task 16: Configure PFE Key (Optional)
- Task 17: Configure Management Server (Optional)
- Flexport
- Open Trunking
- Task 18: Set Switch Date and Time
- Task 19: Configure the Sphereon 3032/3232 Element Manager Applications
- Task 20: Configure Switch Operating Parameters
- Task 21: Configure Fabric Operating Parameters
- Fabric Parameters
- Configure Ports (Open Systems Mode)
- Configure Ports (FICON Mode)
- Configure Port Addresses (FICON Mode)
- Configure SNMP Trap Message Recipients
- Configure and Enable E-mail Notification
- Configure and Enable Ethernet Events
- Configure and Enable Call-Home Event Notification
- Configure Threshold Alerts
- Procedures
- Task 22: Configure Open Trunking
- Task 23: Test Remote Notification (Optional)
- Task 24: Back Up Configuration Data
- Task 25: Configure the Switch from the EFCM Basic Interface (Optional)
- Configure Product Identification
- Configure Date and Time
- Configure Parameters
- Configure Fabric Parameters
- Configure Network Information
- Configure Basic Port Information
- Configure Port BB_Credit
- Configure Port NPIV
- Configure SNMP
- Enable CLI
- Enable or Disable Host Control
- Configure SSL Encryption
- Install PFE Keys (Optional)
- Configure Security
- Configure Interswitch Links
- Task 5: Configure Product Network Information (Optional)
- Task 26: Cable Fibre Channel Ports
- Task 27: Connect Switch to a Fabric Director (Optional)
- Task 28: Register with the McDATA File Center
- Diagnostics
- Maintenance Analysis Procedures
- MAP 0000: Start MAP
- MAP 0100: Power Distribution Analysis
- MAP 0200: POST, Reset, or IPL Failure Analysis
- MAP 0300: Console Application Problem Determination
- MAP 0400: Loss of Console Communication
- MAP 0500: Fan and CTP Card Failure Analysis
- MAP 0600: Port Failure and Link Incident Analysis
- MAP 0700: Fabric, ISL, and Segmented Port Problem Determination
- MAP 0800: Server Hardware Problem Determination
- Repair Information
- Factory Defaults
- Procedural Notes
- Using Log Information
- Using Views
- FRU List View
- Performing Port Diagnostics
- Swapping Ports
- Collecting Maintenance Data
- Clean Fiber-Optic Components
- Power-On Procedure
- Power-Off Procedure
- Reset or IPL the Switch
- Set the Switch Online or Offline
- Block and Unblock Ports
- Manage Firmware Versions
- Manage Configuration Data
- Install or Upgrade Software
- FRU Removal and Replacement
- Illustrated Parts Breakdown
- Messages
- Event Code Tables
- Restore EFC Server
- Consolidating EFC Servers in a Multiswitch Fabric
- Glossary
- Index

g-44
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Glossary
scalable Refers to how well a system can adapt to increased demands. For
example, a scalable network system could start with just a few nodes
but easily expands to thousands of nodes. Scalability is important
because it allows the user to invest in a system with confidence that a
business will not outgrow it. Refers to anything whose size can be
changed.
SCSI See small computer system interface.
segment A fabric segments when one or more switches cannot join the fabric
because of various reasons. The switch or switches remain as separate
fabrics.
segmented E_Port See segmented expansion port.
segmented expansion
port
Segmented E_Port. E_Port that has ceased to function as an E_Port
within a multiswitch fabric due to an incompatibility between the
fabrics that it joins. See also bridge port; fabric port; generic port; node
port.
serial port A full-duplex channel that sends and receives data at the same time.
It consists of three wires: two that move data one bit at a time in
opposite directions, and a third wire that is a common signal ground
wire.
server A computer that provides shared resources, such as files and printers,
to the network. Used primarily to store data, providing access to
shared resources. Usually contains a network operating system.
SFP transceivers See small form factor pluggable transceivers.
shortwave Lasers or light-emitting diodes (LEDs) that emit light with wave-
lengths around 780 nm or 850 nm. When using multimode fiber (50
nm) shortwave lasers can be used with Fibre Channel links less than
500 m. To achieve longer lengths, single-mode fiber is required. The
preferred fiber core size is 50 micron as this fiber has large bandwidth
so that the distance is limited by the fiber attenuation. A 62.5 micron
core size is also supported for compatibility with existing FDDI
installations. Fiber of this type has smaller bandwidth and, in this
case, the distance is limited by the fiber bandwidth.
simple mail transfer
protocol
SMTP. A transmission control protocol/Internet protocol (TCP/IP)
protocol that allows the user to create, send, and receive text mes-
sages. SMTP protocols specify how messages are passed across a link










