FW 08.01.00 McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual (620-000155-220, November 2005)
Table Of Contents
- Preface
- General Information
- Installation Tasks
- Factory Defaults
- Installation Options
- Summary of Installation Tasks
- Task 1: Verify Installation Requirements
- Task 2: Unpack, Inspect, and Install the Ethernet Hub (Optional)
- Task 3: Unpack, Inspect, and Install the Switch
- Task 4: Configure Network Information
- Task 5: LAN-Connect the Switch
- Task 6: Unpack, Inspect, and Install the Management Server
- Task 7: Configure Management Server Password and Network Addresses
- Task 8: Configure Management Server Information
- Task 9: Configure Windows 2000 Users
- Task 10: Set Management Server Date and Time
- Task 11: Configure the Call-Home Feature (Optional)
- Task 12: Assign User Names and Passwords
- Task 13: Configure the Switch to the Management Application
- Task 14: Record or Verify Management Server Restore Information
- Task 15: Verify Switch-to-Management Server Communication
- Task 16: Configure PFE Key (Optional)
- Task 17: Configure Management Server (Optional)
- Flexport
- Open Trunking
- Task 18: Set Switch Date and Time
- Task 19: Configure the Sphereon 3032/3232 Element Manager Applications
- Task 20: Configure Switch Operating Parameters
- Task 21: Configure Fabric Operating Parameters
- Fabric Parameters
- Configure Ports (Open Systems Mode)
- Configure Ports (FICON Mode)
- Configure Port Addresses (FICON Mode)
- Configure SNMP Trap Message Recipients
- Configure and Enable E-mail Notification
- Configure and Enable Ethernet Events
- Configure and Enable Call-Home Event Notification
- Configure Threshold Alerts
- Procedures
- Task 22: Configure Open Trunking
- Task 23: Test Remote Notification (Optional)
- Task 24: Back Up Configuration Data
- Task 25: Configure the Switch from the EFCM Basic Interface (Optional)
- Configure Product Identification
- Configure Date and Time
- Configure Parameters
- Configure Fabric Parameters
- Configure Network Information
- Configure Basic Port Information
- Configure Port BB_Credit
- Configure Port NPIV
- Configure SNMP
- Enable CLI
- Enable or Disable Host Control
- Configure SSL Encryption
- Install PFE Keys (Optional)
- Configure Security
- Configure Interswitch Links
- Task 5: Configure Product Network Information (Optional)
- Task 26: Cable Fibre Channel Ports
- Task 27: Connect Switch to a Fabric Director (Optional)
- Task 28: Register with the McDATA File Center
- Diagnostics
- Maintenance Analysis Procedures
- MAP 0000: Start MAP
- MAP 0100: Power Distribution Analysis
- MAP 0200: POST, Reset, or IPL Failure Analysis
- MAP 0300: Console Application Problem Determination
- MAP 0400: Loss of Console Communication
- MAP 0500: Fan and CTP Card Failure Analysis
- MAP 0600: Port Failure and Link Incident Analysis
- MAP 0700: Fabric, ISL, and Segmented Port Problem Determination
- MAP 0800: Server Hardware Problem Determination
- Repair Information
- Factory Defaults
- Procedural Notes
- Using Log Information
- Using Views
- FRU List View
- Performing Port Diagnostics
- Swapping Ports
- Collecting Maintenance Data
- Clean Fiber-Optic Components
- Power-On Procedure
- Power-Off Procedure
- Reset or IPL the Switch
- Set the Switch Online or Offline
- Block and Unblock Ports
- Manage Firmware Versions
- Manage Configuration Data
- Install or Upgrade Software
- FRU Removal and Replacement
- Illustrated Parts Breakdown
- Messages
- Event Code Tables
- Restore EFC Server
- Consolidating EFC Servers in a Multiswitch Fabric
- Glossary
- Index
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
i-2
Index
enable at EFC Server 2-94
channel wrap test, procedure 4-33
circle, green
meaning of 1-43
clear system error light
product menu 1-29
close
product menu 1-30
closing the element manager 1-44
command line interface
disable 2-118
enable 2-118
command line interface management 1-3
configuration data
backing up 2-103, 4-56
managing 4-55
resetting 4-58
restoring 4-57
configurations
backing up and restoring 1-37
resetting 1-37
configure 2-13
access control list
EFCM Basic 2-123
authentication settings
EFCM Basic 2-123
basic port information
EFCM Basic 2-114
call-home feature 2-46
call-home support 2-94
EFC Server IP address 2-25
EFC Server password 2-25
EFC Server subnet mask 2-25
Enterprise Fabric Mode
EFCM Basic 2-123
Ethernet events 2-93
fabric binding
EFCM Basic 2-124
fabric parameters
EFCM Basic 2-111
ISL performance features
EFCM Basic 2-124
management server DNS domain name 2-30
management server name 2-30
OpenTrunking
EFCM Basic 2-124
OSMS
EFCM Basic 2-118
PFE keys
EFCM Basic 2-120
port BB_Credit
EFCM Basic 2-115
port binding
EFCM Basic 2-124
port fencing
EFCM Basic 2-124
port NPIV
EFCM Basic 2-116
preferred path
EFCM Basic 2-124
RADIUS server
EFCM Basic 2-123
SANtegrity authentication
EFCM Basic 2-123
SANtegrity binding
EFCM Basic 2-123
security features
EFCM Basic 2-123
SNMP
EFCM Basic 2-116
SSL encryption
software 2-119
web 2-119
switch binding
EFCM Basic 2-124
switch date and time
EFCM Basic 2-108
switch identification
EFCM Basic 2-107
switch network information
EFCM Basic 2-112
maintenance port 2-125
switch operating parameters
EFCM Basic 2-109
switch to SAN management application 2-51
Windows 2000 users 2-38
configure date and time dialog box 1-33
configure fabric parameters dialog box 2-6, 2-81
configure feature key dialog box 1-33
configure identification dialog box 1-30
configure menu 1-30
date and time 1-33
date/time 1-33
enable telnet 1-34