FW 08.01.00 McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual (620-000155-220, November 2005)
Table Of Contents
- Preface
- General Information
- Installation Tasks
- Factory Defaults
- Installation Options
- Summary of Installation Tasks
- Task 1: Verify Installation Requirements
- Task 2: Unpack, Inspect, and Install the Ethernet Hub (Optional)
- Task 3: Unpack, Inspect, and Install the Switch
- Task 4: Configure Network Information
- Task 5: LAN-Connect the Switch
- Task 6: Unpack, Inspect, and Install the Management Server
- Task 7: Configure Management Server Password and Network Addresses
- Task 8: Configure Management Server Information
- Task 9: Configure Windows 2000 Users
- Task 10: Set Management Server Date and Time
- Task 11: Configure the Call-Home Feature (Optional)
- Task 12: Assign User Names and Passwords
- Task 13: Configure the Switch to the Management Application
- Task 14: Record or Verify Management Server Restore Information
- Task 15: Verify Switch-to-Management Server Communication
- Task 16: Configure PFE Key (Optional)
- Task 17: Configure Management Server (Optional)
- Flexport
- Open Trunking
- Task 18: Set Switch Date and Time
- Task 19: Configure the Sphereon 3032/3232 Element Manager Applications
- Task 20: Configure Switch Operating Parameters
- Task 21: Configure Fabric Operating Parameters
- Fabric Parameters
- Configure Ports (Open Systems Mode)
- Configure Ports (FICON Mode)
- Configure Port Addresses (FICON Mode)
- Configure SNMP Trap Message Recipients
- Configure and Enable E-mail Notification
- Configure and Enable Ethernet Events
- Configure and Enable Call-Home Event Notification
- Configure Threshold Alerts
- Procedures
- Task 22: Configure Open Trunking
- Task 23: Test Remote Notification (Optional)
- Task 24: Back Up Configuration Data
- Task 25: Configure the Switch from the EFCM Basic Interface (Optional)
- Configure Product Identification
- Configure Date and Time
- Configure Parameters
- Configure Fabric Parameters
- Configure Network Information
- Configure Basic Port Information
- Configure Port BB_Credit
- Configure Port NPIV
- Configure SNMP
- Enable CLI
- Enable or Disable Host Control
- Configure SSL Encryption
- Install PFE Keys (Optional)
- Configure Security
- Configure Interswitch Links
- Task 5: Configure Product Network Information (Optional)
- Task 26: Cable Fibre Channel Ports
- Task 27: Connect Switch to a Fabric Director (Optional)
- Task 28: Register with the McDATA File Center
- Diagnostics
- Maintenance Analysis Procedures
- MAP 0000: Start MAP
- MAP 0100: Power Distribution Analysis
- MAP 0200: POST, Reset, or IPL Failure Analysis
- MAP 0300: Console Application Problem Determination
- MAP 0400: Loss of Console Communication
- MAP 0500: Fan and CTP Card Failure Analysis
- MAP 0600: Port Failure and Link Incident Analysis
- MAP 0700: Fabric, ISL, and Segmented Port Problem Determination
- MAP 0800: Server Hardware Problem Determination
- Repair Information
- Factory Defaults
- Procedural Notes
- Using Log Information
- Using Views
- FRU List View
- Performing Port Diagnostics
- Swapping Ports
- Collecting Maintenance Data
- Clean Fiber-Optic Components
- Power-On Procedure
- Power-Off Procedure
- Reset or IPL the Switch
- Set the Switch Online or Offline
- Block and Unblock Ports
- Manage Firmware Versions
- Manage Configuration Data
- Install or Upgrade Software
- FRU Removal and Replacement
- Illustrated Parts Breakdown
- Messages
- Event Code Tables
- Restore EFC Server
- Consolidating EFC Servers in a Multiswitch Fabric
- Glossary
- Index
i-3
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Index
enable web server 1-34
export configuration report 1-34
fabric parameters 1-31
features 1-33
identification 1-30
open trunking 1-33
ports 1-31
SNMP agent 1-32
switch binding 1-31, 2-65
switch parameters 1-31
threshold alert(s) 1-33
configure open trunking
pop-up menu 2-72
configure open trunking dialog box 1-33, 2-70
configure open trunking dialog box menu 2-72
configure ports dialog box 1-31
configure SNMP dialog box 1-32
configure switch parameters dialog box 2-6, 2-78,
5-9
configuring
date and time 1-33
fabric operating parameters 2-6, 2-81
configuring date and time, menu option 1-33
configuring features, menu option 1-33
configuring open trunking, menu option 1-33
congested threshold %
port properties dialog box 4-27
connectors and indicators 1-21
CTP card
CMM module, event codes B-73
event codes B-31
MPC module, event codes B-67
port module, event codes B-45
D
data collection 1-6
data collection option 1-35
data collection procedure
EFC Server 4-38
SANpilot interface 4-36
date
set switch date
EFCM Basic 2-108
default
DNS server IP address 2-53
EFC Manager password 2-47, 2-106, 4-62
EFC Manager user name 2-47, 2-106, 4-62
EFC Server gateway address 2-53
EFC Server IP address 2-53
EFC Server subnet mask 2-53
EFCM Basic Edition
password 2-107
user name 2-107
maintenance port password 2-127
TightVNC password 2-31, 2-105, 4-61
Windows 2000 password 2-32, 2-106, 4-62
Windows 2000 user name 2-32, 2-106, 4-62
defaults
call-home notification 1-36
enable e-mail notification 1-36
switch priority setting 2-84
defaults, factory-set 2-1
desktop installation
hub 2-8
switch 2-4, 2-13
diagnostic software
introduction 1-5
diagnostics
EFC Manager 1-23
port 4-22
software 1-23
dialog boxes 2-72
configure date and time 1-33
configure fabric parameters 2-6, 2-81
configure feature key 1-33
configure identification 1-30
configure open trunking 1-33, 2-70
configure ports 1-31
configure SNMP 1-32
configure switch parameters 2-6, 2-78, 5-9
export configuration report 1-34
fabric operating parameters 1-31
firmware library 1-36
keyboard navigation 1-28
port diagnostics 1-35
port properties 1-39
save data collection 1-35
set online state 1-36
swap ports 1-35
switch binding membership list 2-65
switch binding state change 2-64
switch operating parameters 1-31
switch properties 1-38