FW 08.01.00 McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual (620-000155-220, November 2005)
Table Of Contents
- Preface
- General Information
- Installation Tasks
- Factory Defaults
- Installation Options
- Summary of Installation Tasks
- Task 1: Verify Installation Requirements
- Task 2: Unpack, Inspect, and Install the Ethernet Hub (Optional)
- Task 3: Unpack, Inspect, and Install the Switch
- Task 4: Configure Network Information
- Task 5: LAN-Connect the Switch
- Task 6: Unpack, Inspect, and Install the Management Server
- Task 7: Configure Management Server Password and Network Addresses
- Task 8: Configure Management Server Information
- Task 9: Configure Windows 2000 Users
- Task 10: Set Management Server Date and Time
- Task 11: Configure the Call-Home Feature (Optional)
- Task 12: Assign User Names and Passwords
- Task 13: Configure the Switch to the Management Application
- Task 14: Record or Verify Management Server Restore Information
- Task 15: Verify Switch-to-Management Server Communication
- Task 16: Configure PFE Key (Optional)
- Task 17: Configure Management Server (Optional)
- Flexport
- Open Trunking
- Task 18: Set Switch Date and Time
- Task 19: Configure the Sphereon 3032/3232 Element Manager Applications
- Task 20: Configure Switch Operating Parameters
- Task 21: Configure Fabric Operating Parameters
- Fabric Parameters
- Configure Ports (Open Systems Mode)
- Configure Ports (FICON Mode)
- Configure Port Addresses (FICON Mode)
- Configure SNMP Trap Message Recipients
- Configure and Enable E-mail Notification
- Configure and Enable Ethernet Events
- Configure and Enable Call-Home Event Notification
- Configure Threshold Alerts
- Procedures
- Task 22: Configure Open Trunking
- Task 23: Test Remote Notification (Optional)
- Task 24: Back Up Configuration Data
- Task 25: Configure the Switch from the EFCM Basic Interface (Optional)
- Configure Product Identification
- Configure Date and Time
- Configure Parameters
- Configure Fabric Parameters
- Configure Network Information
- Configure Basic Port Information
- Configure Port BB_Credit
- Configure Port NPIV
- Configure SNMP
- Enable CLI
- Enable or Disable Host Control
- Configure SSL Encryption
- Install PFE Keys (Optional)
- Configure Security
- Configure Interswitch Links
- Task 5: Configure Product Network Information (Optional)
- Task 26: Cable Fibre Channel Ports
- Task 27: Connect Switch to a Fabric Director (Optional)
- Task 28: Register with the McDATA File Center
- Diagnostics
- Maintenance Analysis Procedures
- MAP 0000: Start MAP
- MAP 0100: Power Distribution Analysis
- MAP 0200: POST, Reset, or IPL Failure Analysis
- MAP 0300: Console Application Problem Determination
- MAP 0400: Loss of Console Communication
- MAP 0500: Fan and CTP Card Failure Analysis
- MAP 0600: Port Failure and Link Incident Analysis
- MAP 0700: Fabric, ISL, and Segmented Port Problem Determination
- MAP 0800: Server Hardware Problem Determination
- Repair Information
- Factory Defaults
- Procedural Notes
- Using Log Information
- Using Views
- FRU List View
- Performing Port Diagnostics
- Swapping Ports
- Collecting Maintenance Data
- Clean Fiber-Optic Components
- Power-On Procedure
- Power-Off Procedure
- Reset or IPL the Switch
- Set the Switch Online or Offline
- Block and Unblock Ports
- Manage Firmware Versions
- Manage Configuration Data
- Install or Upgrade Software
- FRU Removal and Replacement
- Illustrated Parts Breakdown
- Messages
- Event Code Tables
- Restore EFC Server
- Consolidating EFC Servers in a Multiswitch Fabric
- Glossary
- Index
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
i-6
Index
Fabricenter equipment cabinet
Ethernet hub installation 2-10
factory defaults 2-1
fans 1-20
event codes B-25
illustrations 6-2
LEDs 1-22
part numbers 6-2
removal 5-6
replacement 5-7
fault isolation
MAP 0800 - Server hardware problem
determination 3-107
reasons for 1-14
feature
SANtegrity 2-62
features
flexport 2-68
SANtegrity binding 2-62
fiber-optic
cleaning kit 1-48
components, cleaning 4-39
fiber-optic components, cleaning 4-39
Fiber-optic protective plug 1-47
Fiber-optic wrap plug 1-47
Fibre Alliance MIB 1-6
fibre channel addresses 2-79
Fibre Connection management server, see FMS
Fibre Connection, see FICON
FICON
product management 1-4
FICON management server 1-29
configure PFE key
EFCM Basic 2-121
FICON management style 1-28, 1-29
FICON management server 1-29
swap ports 1-35
FICON mode
swap ports 1-35
field replaceable units
See FRUs
file center
registration 2-131
firmware
adding a version 4-48
deleting a version 4-52
determining version 4-47
downloading 4-52
managing versions 4-47
managing versions of 4-47
modifying description 4-51
firmware library dialog box 1-36
firmware versions 1-36
FL_Port
configure 2-114
flexport feature 2-68
flexport feature, McDATA
re-enabling 2-15
Flexport PFE key 2-57
FMS
product management 1-4
frames
routing of 2-80
FRU
description 1-29
product menu 1-29
FRU list view 1-43
FRUs 1-18
fans 1-20, 6-2
front-accessible 6-1
illustrations 6-1
part numbers 6-1
power supplies 1-20, 6-2
rear-accessible 6-2
RRPs 5-1
SFP transceivers 6-1
status LEDs 1-22
FRUs, backup
checking status of 1-6
full-volatility feature 4-36
configure PFE key
EFCM Basic 2-121
G
gateway address
change switch address 2-112, 2-125
configuring 2-15
default 2-1, 3-1, 4-2
EFC Server default 2-53
gateway address, default value 2-3
H
hardware log 1-35, 4-9