FW 08.01.00 McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual (620-000155-220, November 2005)
Table Of Contents
- Preface
- General Information
- Installation Tasks
- Factory Defaults
- Installation Options
- Summary of Installation Tasks
- Task 1: Verify Installation Requirements
- Task 2: Unpack, Inspect, and Install the Ethernet Hub (Optional)
- Task 3: Unpack, Inspect, and Install the Switch
- Task 4: Configure Network Information
- Task 5: LAN-Connect the Switch
- Task 6: Unpack, Inspect, and Install the Management Server
- Task 7: Configure Management Server Password and Network Addresses
- Task 8: Configure Management Server Information
- Task 9: Configure Windows 2000 Users
- Task 10: Set Management Server Date and Time
- Task 11: Configure the Call-Home Feature (Optional)
- Task 12: Assign User Names and Passwords
- Task 13: Configure the Switch to the Management Application
- Task 14: Record or Verify Management Server Restore Information
- Task 15: Verify Switch-to-Management Server Communication
- Task 16: Configure PFE Key (Optional)
- Task 17: Configure Management Server (Optional)
- Flexport
- Open Trunking
- Task 18: Set Switch Date and Time
- Task 19: Configure the Sphereon 3032/3232 Element Manager Applications
- Task 20: Configure Switch Operating Parameters
- Task 21: Configure Fabric Operating Parameters
- Fabric Parameters
- Configure Ports (Open Systems Mode)
- Configure Ports (FICON Mode)
- Configure Port Addresses (FICON Mode)
- Configure SNMP Trap Message Recipients
- Configure and Enable E-mail Notification
- Configure and Enable Ethernet Events
- Configure and Enable Call-Home Event Notification
- Configure Threshold Alerts
- Procedures
- Task 22: Configure Open Trunking
- Task 23: Test Remote Notification (Optional)
- Task 24: Back Up Configuration Data
- Task 25: Configure the Switch from the EFCM Basic Interface (Optional)
- Configure Product Identification
- Configure Date and Time
- Configure Parameters
- Configure Fabric Parameters
- Configure Network Information
- Configure Basic Port Information
- Configure Port BB_Credit
- Configure Port NPIV
- Configure SNMP
- Enable CLI
- Enable or Disable Host Control
- Configure SSL Encryption
- Install PFE Keys (Optional)
- Configure Security
- Configure Interswitch Links
- Task 5: Configure Product Network Information (Optional)
- Task 26: Cable Fibre Channel Ports
- Task 27: Connect Switch to a Fabric Director (Optional)
- Task 28: Register with the McDATA File Center
- Diagnostics
- Maintenance Analysis Procedures
- MAP 0000: Start MAP
- MAP 0100: Power Distribution Analysis
- MAP 0200: POST, Reset, or IPL Failure Analysis
- MAP 0300: Console Application Problem Determination
- MAP 0400: Loss of Console Communication
- MAP 0500: Fan and CTP Card Failure Analysis
- MAP 0600: Port Failure and Link Incident Analysis
- MAP 0700: Fabric, ISL, and Segmented Port Problem Determination
- MAP 0800: Server Hardware Problem Determination
- Repair Information
- Factory Defaults
- Procedural Notes
- Using Log Information
- Using Views
- FRU List View
- Performing Port Diagnostics
- Swapping Ports
- Collecting Maintenance Data
- Clean Fiber-Optic Components
- Power-On Procedure
- Power-Off Procedure
- Reset or IPL the Switch
- Set the Switch Online or Offline
- Block and Unblock Ports
- Manage Firmware Versions
- Manage Configuration Data
- Install or Upgrade Software
- FRU Removal and Replacement
- Illustrated Parts Breakdown
- Messages
- Event Code Tables
- Restore EFC Server
- Consolidating EFC Servers in a Multiswitch Fabric
- Glossary
- Index
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
i-10
Index
NV-RAM 2-78, 2-81
O
offline, setting switch 4-44
online, setting switch 4-44
open fabric 1.0 2-84
open systems management server 1-29
installing 2-59
open systems management style 1-29
open systems management server 1-29
open trunking feature 2-69
dialog box 2-70
dialog box menu 2-72
enabling and configuring 2-70
log 2-73
open trunking log 1-35
open-system management server, see OSMS
open-systems management server (configure)
EFCM Basic 2-118
OpenTrunking
configure
EFCM Basic 2-124
configure PFE key
EFCM Basic 2-121
description 2-124
OpenTrunking PFE key 2-57
operating environment 1-11
operating parameters
default values 2-3
operating parameters (configure)
EFCM Basic 2-109
operating status for the switch 1-43
OSMS
product management 1-4
out-of-band management
description 1-2
out-of-band management, illustration of 1-4
P
part numbers 6-1
parts 6-1
password
assigning 2-47
default 2-1, 3-1, 4-2
default EFC Manager 2-47, 2-106, 4-62
default EFCM Basic Edition 2-107
default maintenance port 2-127
default TightVNC 2-31, 2-105, 4-61
default Windows 2000 2-32, 2-106, 4-62
Performance View 4-20
performance view menu 1-41
performance view option 1-41
PFE keys
configure
EFCM Basic 2-120
Element Manager application 2-120
FICON management server 2-121
Flexport feature 2-57
full-volatility 2-121
N_Port ID virtualization 2-121
OpenTrunking 2-57, 2-121
SANtegrity (enhanced) 2-121
SANtegrity binding 2-57
port
blocking 4-45
cabling 2-128
description 1-29
diagnostics 4-22
LEDs 4-22
loopback tests, external 4-31
loopback tests, internal 4-29
module, event codes B-45
segmentation 1-9
swapping 4-34
unblocking 4-46
port addresses
default value 2-2
port bandwidth 1-1
port binding 2-85, 2-87
configure
EFCM Basic 2-124
description 2-124
enable
EFCM Basic 2-124
port blocked states, default value 2-2
port diagnostics dialog box 1-35
port fencing
configure
EFCM Basic 2-124
description 2-124
Port List View 4-15
port list view menu 1-40
port menu 1-39