FW 08.01.00 McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual (620-000155-220, November 2005)
Table Of Contents
- Preface
- General Information
- Installation Tasks
- Factory Defaults
- Installation Options
- Summary of Installation Tasks
- Task 1: Verify Installation Requirements
- Task 2: Unpack, Inspect, and Install the Ethernet Hub (Optional)
- Task 3: Unpack, Inspect, and Install the Switch
- Task 4: Configure Network Information
- Task 5: LAN-Connect the Switch
- Task 6: Unpack, Inspect, and Install the Management Server
- Task 7: Configure Management Server Password and Network Addresses
- Task 8: Configure Management Server Information
- Task 9: Configure Windows 2000 Users
- Task 10: Set Management Server Date and Time
- Task 11: Configure the Call-Home Feature (Optional)
- Task 12: Assign User Names and Passwords
- Task 13: Configure the Switch to the Management Application
- Task 14: Record or Verify Management Server Restore Information
- Task 15: Verify Switch-to-Management Server Communication
- Task 16: Configure PFE Key (Optional)
- Task 17: Configure Management Server (Optional)
- Flexport
- Open Trunking
- Task 18: Set Switch Date and Time
- Task 19: Configure the Sphereon 3032/3232 Element Manager Applications
- Task 20: Configure Switch Operating Parameters
- Task 21: Configure Fabric Operating Parameters
- Fabric Parameters
- Configure Ports (Open Systems Mode)
- Configure Ports (FICON Mode)
- Configure Port Addresses (FICON Mode)
- Configure SNMP Trap Message Recipients
- Configure and Enable E-mail Notification
- Configure and Enable Ethernet Events
- Configure and Enable Call-Home Event Notification
- Configure Threshold Alerts
- Procedures
- Task 22: Configure Open Trunking
- Task 23: Test Remote Notification (Optional)
- Task 24: Back Up Configuration Data
- Task 25: Configure the Switch from the EFCM Basic Interface (Optional)
- Configure Product Identification
- Configure Date and Time
- Configure Parameters
- Configure Fabric Parameters
- Configure Network Information
- Configure Basic Port Information
- Configure Port BB_Credit
- Configure Port NPIV
- Configure SNMP
- Enable CLI
- Enable or Disable Host Control
- Configure SSL Encryption
- Install PFE Keys (Optional)
- Configure Security
- Configure Interswitch Links
- Task 5: Configure Product Network Information (Optional)
- Task 26: Cable Fibre Channel Ports
- Task 27: Connect Switch to a Fabric Director (Optional)
- Task 28: Register with the McDATA File Center
- Diagnostics
- Maintenance Analysis Procedures
- MAP 0000: Start MAP
- MAP 0100: Power Distribution Analysis
- MAP 0200: POST, Reset, or IPL Failure Analysis
- MAP 0300: Console Application Problem Determination
- MAP 0400: Loss of Console Communication
- MAP 0500: Fan and CTP Card Failure Analysis
- MAP 0600: Port Failure and Link Incident Analysis
- MAP 0700: Fabric, ISL, and Segmented Port Problem Determination
- MAP 0800: Server Hardware Problem Determination
- Repair Information
- Factory Defaults
- Procedural Notes
- Using Log Information
- Using Views
- FRU List View
- Performing Port Diagnostics
- Swapping Ports
- Collecting Maintenance Data
- Clean Fiber-Optic Components
- Power-On Procedure
- Power-Off Procedure
- Reset or IPL the Switch
- Set the Switch Online or Offline
- Block and Unblock Ports
- Manage Firmware Versions
- Manage Configuration Data
- Install or Upgrade Software
- FRU Removal and Replacement
- Illustrated Parts Breakdown
- Messages
- Event Code Tables
- Restore EFC Server
- Consolidating EFC Servers in a Multiswitch Fabric
- Glossary
- Index

McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
i-14
Index
related number codes 2-84
switch priority setting 2-84
switch properties dialog box 1-38
switch replacement procedure 5-8
switches, principal, determining 2-83
symbols, status bar, table of 1-43
system events 1-14
T
tabs
view 1-38
technical support
file center registration 2-131
threshold alert log 1-35
threshold alerts 1-33
TightVNC
access management server desktop 2-30
default password 2-31, 2-105, 4-61
time
set switch time
EFCM Basic 2-108
tools and test equipment 1-46
tools, supplied by service personnel 1-48
tools, supplied with switch 1-46
transmission distance 1-1
trap messages
maximum recipients 1-6
trap recipient IP addresses, default value 2-3
triangle, yellow
meaning of 1-43
trunking feature 2-69
dialog box 2-70
dialog box menu 2-72
enabling and configuring 2-70
log 2-73
U
UDP port, default value 2-3
unblocking a port 4-46
unresponsive switch 1-9
user name
assigning 2-47
default EFC Manager 2-47, 2-106, 4-62
default EFCM Basic Edition 2-107
default Windows 2000 2-32, 2-106, 4-62
user name, assigning 2-47
V
versions, firmware 1-36
view panel 1-38
view tabs 1-38
views
Hardware 4-23
Node List 4-19
Performance 4-20, 4-27
Port List 4-15
Zone set 4-20
W
warnings
resetting configurations 1-37
web server
introduction 1-3
web server, enabling 1-34
Windows 2000
configure users 2-38
default password 2-32, 2-106, 4-62
default user name 2-32, 2-106, 4-62
WWN
principal switch 2-83
WWN binding 2-85, 2-87
WWN, zone member 4-21
Z
zone members, default value 2-4
zone set
description of 1-7
zone set state, default value 2-4
Zone set View 4-20
zone sets, default value 2-4
zone states, default value 2-4
zones, number of, default value 2-4
zoning 1-7
zoning, cautions about 1-7
zoning, default values 2-4










