32 Installation Guide (AA-RSTZF-TE, November 2005)

Edge Switch 2/32 installation guide 101

l. If the new firmware version was downloaded to a PC (not the HAFM appliance), transfer the

firmware version file to the switch by backup disk, CD-ROM, or other electronic means.

2. At the HAFM application’s physical map, right-click the product icon representing the Edge

Switch for which a firmware version is to be added, and then select Element Manager from the

pop-up menu.

The application opens.

3. Select Maintenance > Firmware Library.

The Firmware Library dialog box is displayed (Figure 59).

Figure 59 Firmware Library dialog box

4. Click New.

The New Firmware Version dialog box is displayed (Figure 60).

Figure 60 New Firmware Version dialog box

5. Select the desired firmware version file (downloaded in step 1) from the HAFM appliance

backup drive, CD-ROM drive, or hard drive. Verify that the correct directory path and file name

is displayed in the File name box and click Save.

The New Firmware Description dialog box is displayed (Figure 61).

Figure 61 New Firmware Description dialog box