32 Installation Guide (AA-RSTZF-TE, November 2005)

ManualsBrandsHP ManualsStorageHP StorageWorks Edge Switch 2/32

Edge Switch 2/32 installation guide 21

Tools supplied by service personnel

The following tools are expected to be supplied by service personnel performing Edge Switch

installation or maintenance actions. Use of the tools may be required to perform one or more test,

service, or verification tasks.

• Scissors or pocket knife—A sharp cutting edge may be required to cut the protective strapping

when unpacking replacement FRUs.

• Standard flat-tip and cross-tip (Phillips) screwdrivers—Screwdrivers are required to remove,

replace, adjust, or tighten various FRUs, chassis, or cabinet components.

• Electrostatic discharge (ESD) grounding cable with attached wrist strap—Use of the ESD wrist

strap is required when working in and around the Edge Switch card cage.

• Maintenance terminal (desktop or notebook PC)—A PC is required to configure Edge Switch

network addresses and acquire event log information through the maintenance port. The PC

must have:

• The Microsoft

Windows

98, Windows

2000, Windows Server 2003, Windows

XP, or

Millennium Edition operating system installed.

• RS-232 serial communication software (such as ProComm Plus or HyperTerminal) installed.

HyperTerminal is provided with Windows operating systems.

• Fiber-optic cleaning kit—The kit contains tools and instructions to clean fiber optic cable,

connectors, loopback plugs, and protective plugs.

Optional kits

Contact your HP-authorized service provider to purchase optional Edge Switch 2/32 kits described

in Table 2.

Table 2 Edge Switch 2/32 optional kits

Supporting Kit Description

8-flexport upgrade for the

Edge Switch 2/32

Part Number: 302660-B21

Used to upgrade the Edge Switch from:

• 16 to 24 ports

• 24 to 32 ports

Edge Switch 2/32 Element Manager license

Part Number: 300658-B21

Used when switch is managed through

HAFM

HP Open Trunking license

Part Number: 336000-B21

Provides a license to use the Open Trunking

feature

HP SANtegrity Binding license

Part Number: 317071-B21

Provides a license to use the SANtegrity

Binding feature

300m Optical Transceiver Kit

Part Number: 300834-B21

Provides short-wave optical transceiver for

the Edge Switch 2/32