32 Installation Guide (AA-RSTZF-TE, November 2005)

Edge Switch 2/32 installation guide 71

The Discover Setup dialog box is displayed (Figure 40).

Figure 40 Discover Setup dialog box

c. Select (highlight) the entry representing the reset switch in the Available Addresses panel and

click Edit.

The Address Properties dialog box is displayed (Figure 41).

Figure 41 Address Properties dialog box

d. Enter 10.1.1.10 in the IP Address box and click OK.

Entries in the Discover Setup dialog box reflect the new IP address.

e. In the Discover Setup dialog box, click OK.

Switch-to-management appliance communication is restored and the procedure is complete.