32 Installation Guide (AA-RSTZF-TE, November 2005)

Using the HAFM Basic interface78

• Basic Information—Enables you to configure basic aspects of a port, such as the ports name,

the blocked status, the Fabric Address Notification (FAN) status, the port type, and the port

speed.

• Rx BB Credit—Enables you to configure receive BB_Credits for a port.

• NPIV—Enables you to configure and enable N_Port ID Virtualization (NPIV) functionality for

a port. Perform the procedure in this section to configure names and operating characteristics

for the Edge Switch ports.

To configure the basic port information:

1. Select Configure > Ports > Basic Information.

The Port Basic Information dialog box is displayed (Figure 45).

Figure 45 Basic Information Dialog box

a. For each port to be configured, enter a port name of 24 or fewer alphanumeric characters in

the associated Name box.

The port name should identify the device to which the port is attached.

NOTE: If you want to select another port, enter the port number in the Jump to Port box and

then click go.

b. Select or clear the check box in the Blocked column to block or unblock a port (default is

unblocked).